Reference Guide

NIC.IscsiFirstTgtParams.FirstTgtIscsiName (Read or
Write)
Description
Set the iSCSI Qualified Name (IQN) of the first iSCSI storage target.
Legal Values
String of up to 223 ASCII characters
NOTE: The legal value range may be smaller than the maximum size of 223, based on the vendor
configuration of the NIC cards.
Default Value Not Applicable
Write Privilege
Server Control
License Required
iDRAC Express or iDRAC Enterprise
Dependency
Not Available if VndrConfigGroup.iSCSIBootSupport is Unavailable.
NIC.IscsiFirstTgtParams.FirstTgtTcpPort (Read or Write)
Description
Set the TCP Port number of the first iSCSI target.
Legal Values
Values from 1 to 65535
Default Value Not Applicable
Write Privilege
Server Control
License Required
iDRAC Express or iDRAC Enterprise
Dependency
Not Available if VndrConfigGroup.iSCSIBootSupport is Unavailable.
NIC.IscsiGenParams
The following section provides information about the objects in the NIC.IscsiGenParams group.
NIC.IscsiGenParams.ChapAuthEnable (Read or Write)
Description
To use CHAP authentication when connecting to the iSCSI target, enable or disable the ability of the initiator.
Legal Values
• Enabled
• Disabled
Default Value
Disabled
Write Privilege
Server Control
License Required
iDRAC Express or iDRAC Enterprise
Dependency
Not available if VndrConfigGroup.iSCSIBootSupport is unavailable.
NIC.IscsiGenParams.ChapMutualAuth (Read or Write)
Description
Enables or disables mutual CHAP authentication between the iSCSI initiator and target.
434 Database Objects With Get and Set Commands