Reference Guide

Synopsis

racadm coredump

Example

• racadm coredump

There is no coredump currently available.

• racadm coredump

Feb 19 15:51:40 (none) last message repeated 5 times

Feb 19 15:52:41 (none) last message repeated 4 times

Feb 19 15:54:12 (none) last message repeated 4 times

Feb 19 15:56:11 (none) last message repeated 2 times

Feb 22 11:46:11 (none) kernel:

coredumpdelete

Description Deletes any currently available coredump data stored in the RAC.

To use this subcommand, you must have Execute Debug Command permission.

NOTE: If a coredumpdelete command is issued and a coredump is not currently stored in the RAC,

the command displays a success message. This behavior is expected. See the coredump

subcommand for more information about viewing a coredump.

Synopsis

racadm coredumpdelete

Output

Coredump is deleted.

Example

racadm coredumpdelete

Coredump request completed successfully

diagnostics

Description

Collects and exports remote diagnostics report from iDRAC.

The results of the latest successfully run remote diagnostics are available and retrievable remotely through an

NFS, CIFS, HTTP, or HTTPS) share.

Synopsis To run a remote diagnostic report:

racadm diagnostics run -m <mode> -r <reboot type> -s <start time> -e

To export a remote diagnostic report:

racadm diagnostics export -f <file name> -l <NFS,CIFS,HTTP,or HTTPS share

location> -u <username> -p <password>

50 RACADM Subcommand Details