Reference Guide
exposeisminstallertohost
Description Exposes the ISM installer to host OS
Synopsis
racadm exposeisminstallertohost
Input Not Applicable
Example Not Applicable
fcstatistics
Description Displays a list of FCs (FQDDs), managed server for which statistics is available.
Synopsis
racadm fcstatistics <FC fqdd>
Input <FC fqdd> — Specify the FQDD of the target FC device.
Example
racadm fcstatistics <FC fqdd>
frontpanelerror
Description
Enables or disables the live-feed of the errors currently being displayed on the LCD screen.
For error acknowledge use hide, and error assert use show.
Synopsis
racadm frontpanelerror show
racadm frontpanelerror hide
Input
• show — to view the errors currently being displayed on the LCD screen.
• hide — to hide the errors currently being displayed on the LCD screen.
Example
• racadm frontpanelerror show
Front Panel Error—Show Enabled.
• racadm frontpanelerror hide
Front Panel Error—Hide Enabled.
fwupdate
Description
Allows you to update the firmware. You can:
• Check the firmware update process status.
• Update iDRAC firmware from FTP or TFTP server by providing an IP address and optional path.
• Update iDRAC firmware from the local file system using Local and Remote RACADM.
• Roll back to the standby firmware.
To use this subcommand, you must have Configure iDRAC permission.
NOTE: If the iSM is exposed on the host server, you may see the Firmware update operation
is already in progress error.
RACADM Subcommand Details 55