Reference Guide

Port Down Timeout: 0
Link Down Timeout: 30000
Port Number: 1
Port Speed: 0
Max Number of IOs per connection supported: 9
Maximum number of Logins per port: 8
Maximum number of exchanges: 9
Maximum NPIV per port: 1
Maximum number of FC Targets supported: 8
Maximum number of outstanding commands across all connections: 9
Flex Addressing: Capable
UEFI: Capable
FC Start: Capable
On Chip Thermal Sensor: Capable
Feature Licensing: Not Capable
ifconfig
Description Displays the contents of the network interface table.
To use this subcommand, you must have the Execute Diagnostic Commands permission.
Synopsis
racadm ifconfig
Input N/A
Example
$ racadm ifconfig
eth0
Link encap:Ethernet HWaddr 00:1D:09:FF:DA:23
inet addr:192.168.0.0 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2550665 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:272532097 (259.9 MiB) TX bytes:0 (0.0 B)
inlettemphistory
Description
Displays the average and the peak temperatures during the last hour, day, week, month, or year. Also Exports the
inlet temperature history data file. The file can be exported to a remote file share, local file system, or the
management station.
NOTE: For FM120x4 systems, this subcommand provides the historical data for system board
temperature.
82 RACADM Subcommand Details