Reference Guide
Input
• -i — Displays the number of records present in the active log.
• -a — The agent ID used to filter the records. Only one agent ID is accepted. The value is case-insensitive. Valid
Agent-ID values:
• UEFI_SS_USC
• CusOsUp
• UEFI_Inventory
• iDRAC
• UEFI_DCS
• SEL
•
RACLOG
• DE
• WSMAN
• RACADM
• iDRAC_GUI
• -c — The category used to filter the records. Provides multiple categories using a "," as the delimiter. The value
is case-insensitive. Valid category values:
• System
• Storage
• Worknotes
• Config
• Updates
• Audit
• -b — The subcategory used to filter the records. Provides multiple subcategories using a "," as the delimiter.
• -q — The sequence number from which the records must be displayed. Records older than this sequence
number is displayed.
NOTE:
This parameter input is an integer. If an alphanumeric input is provided, then invalid
subcommand syntax error is displayed.
• -n — Specifies the n number of records that must be displayed. On Local RACADM, if this parameter is not
specified, by default 100 logs are retrieved.
• -r — Displays events that have occurred after this time. The time format is yyyy-mm-dd HH:MM:SS. The time
stamp must be provided within double quotation marks.
• -e — Displays events that have occurred before this time. The time format is yyyy-mm-dd HH:MM:SS. The
time stamp must be provided within double quotation marks.
• -f <filename> — Specifies the file location and name where lifecycle log is exported.
• -a <name> — Specifies the FTP Server IP address or FQDN, user name, and password.
• -l <location> — Specifies the location of the network share or area on file system where lifecycle log is
exported. Two types of network shares are supported:
• SMB-mounted path: //<ipaddress or domain name>/<share_name>/<path to image>
• NFS-mounted path: <ipaddress>:/<path to image>.
• -u <user> — Specifies the user name for accessing the FTP server, or Domain and user name for accessing
network share location.
• -p <password> — Specifies the password for accessing the FTP server or share location.
• -s — The severity used to filter the records. Provide multiple severities using a "," as the delimiter. The value is
case-insensitive. Valid Severity values:
• Warning
• Critical
• Info
• —m <Comment> — User comment string for a record that must be inserted in the Lifecycle Controller log. This
comment string must be less than 128 characters. The text must be specified within double quotation mark.
NOTE:
HTML-specific characters may appear as escaped text.
• -m <Worknote> — Adds a worknote (an entry) in the Lifecycle log. This worknote must be less than 256
characters. The text must be specified within double quotation mark.
NOTE:
HTML-specific characters may appear as escaped text.
NOTE: For -m <worknote> and —m <comment> options, you need test alert privilege.
• --complete — Export the complete Lifecycle log as a compressed file. The exported file will be of the
type
.xml.gz.
• -j<Job ID> — Specifies the Job ID.
88
RACADM Subcommand Details