Reference Guide

Synopsis
Local RACADM proxy usage
racadm <CMC racadm subcommand> --proxy
Remote RACADM proxy usage
racadm <CMC racadm subcommand> -u <username> -p <password> -r <idrac-ip
connected to cmc> --proxy
NOTE:
• The attribute racadm getconfig -g cfgractuning -o cfgRacTuneChassisMgmtAtServer
must be set as non-zero in CMC.
• The attribute racadm get system.ChassisControl.ChassisManagementMonitoring
attribute must be enabled in iDRAC.
• --proxy must be entered at the end of the command.
• The root privilege is the default privilege for Local RACADM proxy.
• The user privilege in the Remote RACADM proxy for CMC maps to iDRAC privilege.
Required CMC Privilege for an operation Required iDRAC Privilege for proxy operation
CMC Login User Login
Chassis Configuration Administrator Configure
User Configuration Administrator Configure User
Clear Logs Administrator Logs
Chassis Control Administrator System Control
Server Administrator System Control
Test Alert User System Operations
Debug Command Administrator Debug
Fabric x Administrator (where x is A, B, or C) System Control
• When CMC is not placed on the network, the import, export, and file operation commands to
CIFS, NFS, or FTP will fail.
• When the Remote or Local RACADM Proxy operation is in progress, if the iDRAC is reset, then the
Proxy operation fails and the output is not displayed in Remote or Local RACADM.
• When racadm getsystem.ChassisControl.ChassisManagementMonitoring attribute is set
to monitor, all the users including root users can only view the attribute.
To configure, set the attribute to monitor and manage in CMC.
Input
• -u — Specifies the user name of the remote share that stores the catalog file.
• -p — Specifies the password of the remote share that stores the catalog file.
• -r — Specifies the iDRAC IP address connected to CMC.
Example
Local RACADM
racadm getractime --proxy
Remote RACADM
racadm getractime -u root -p xxx -r 192.168.0 getractime --proxy
RACADM Subcommand Details 95