Reference Guide

ManualsBrandsDell ManualsActive System ManageriDRAC9 - 3.0x Series

100

racdump

Description Provides a single command to get dump, status, and general iDRAC board information.

To run this subcommand, you must have the Debug permission.

• General System/RAC Information

• Coredump Information

• Network Interface Statistics

• Session Information

• Process Information

• RAC Firmware Build Log

Synopsis

racadm racdump

Input N/A

Example

===============================================================================

General System/RAC Information

===============================================================================

RAC Information:

RAC Date/Time = Thu May 18 13:35:32 2017

Firmware Version = 3.00.00.00

Firmware Build = 12

Last Firmware Update = 04/04/2017 19:41:38

Hardware Version = 0.01

MAC Address = 18:03:73:F7:B7:CA

Common settings:

DNS RAC Name = idrac

Current DNS Domain =

Domain Name from DHCP = Disabled

IPv4 settings:

Enabled = 1

Current IP Address = 192.168.0.1

Current IP Gateway = 192.168.0.1

Current IP Netmask = 192.168.0.1

DHCP Enabled = 0

Current DNS Server 1 = 0.0.0.0

Current DNS Server 2 = 0.0.0.0

DNS Servers from DHCP = Disabled

IPv6 settings:

Enabled = 0

Current IP Address 1 = ::

Current IP Gateway = ::

Autoconfig = 1

Link Local IP Address = ::

Current IP Address 2 = ::

Current IP Address 3 = ::

Current IP Address 4 = ::

Current IP Address 5 = ::

Current IP Address 6 = ::

Current IP Address 7 = ::

Current IP Address 8 = ::

Current IP Address 9 = ::

Current IP Address 10 = ::

Current IP Address 11 = ::

Current IP Address 12 = ::

Current IP Address 13 = ::

Current IP Address 14 = ::

Current IP Address 15 = ::

RACADM Subcommand Details