CLI Guide

Output If upload is successful, the message User certificate successfully uploaded to the RAC. If
unsuccessful, appropriate error message is displayed.
Example
To upload user certificate for user 6.
racadm usercertupload -t 1 -f c:\cert\cert.txt -i 6
usercertview
Table 111. Details of usercertview
Description Displays the user certificate or user CA certificate that exists on iDRAC.
Synopsis
racadm usercertview -t <type> [-A] -i <index>
Input
• -t — Specifies the type of certificate to view, either the user certificate or the user CA certificate.
• 1=user certificate
• 2=user CA certificate
• -A — Prevents printing headers or labels.
• -i — Index number of the user. Valid values are 2–16.
Example
To view user certificate for user 6.
racadm usercertview -t 1 -i 6
Serial Number : 01
Subject Information:
Country Code (CC) : US
State (S) : Texas
Locality (L) : Round Rock
Organization (O) : Dell Inc.
Common Name (CN) : iDRAC default certificate
Issuer Information:
Country Code (CC) : US
State (S) : Texas
Locality (L) : Round Rock
Organization (O) : Dell Inc.
Organizational Unit (OU): Remote Access Group
Common Name (CN) : iDRAC default certificate
Valid From : May 7 23:54:19 2017 GMT
Valid To : May 4 23:54:19 2027 GMT
vflashsd
Table 112. Details of vflashsd
Description Allows you to initialize or get the status of the vFlash SD card. The initialize operation removes all the existing
partitions and resets the card.
The status operation displays the status of the last operation performed on the card.
To run this subcommand, you must have the Access Virtual Media privilege.
NOTE: After you restart the iDRAC, the status of the previous initialize operation is erased.
Synopsis
• racadm vflashsd initialize
• racadm vflashsd status
RACADM Subcommand Details 155