CLI Guide

System Board PS Redundancy Disabled PSU
Sensor Type : SYSTEM PERFORMANCE
Table 49. Sensor Type : SYSTEM PERFORMANCE
<Sensor Name> <Status> <Reading> <lc> <uc> <Inc> [R/W] <unc> [R/W]
System Board
CPU Usage
Non-Critical 0% 0% 100% 0% [N] 99% [Y]
System Board
IO Usage
Non-Critical 0% 0% 100% 0% [N] 99% [Y]
System Board
MEM Usage
Non-Critical 0% 0% 100% 0% [N] 99% [Y]
System Board
SYS Usage
Non-Critical 0% 0% 100% 0% [N] 99% [Y]
getssninfo
Table 50. Details of getssninfo
Description
Displays a list of users that are connected to iDRAC. The following information is displayed:
• Session ID
• Username
• IP address (if applicable)
• Session type (for example, serial or Telnet)
• Login date and time in MM/DD/YYYY HH:MM:SS format
NOTE: Based on the Session ID (SSNID) or the user name (User), the iDRAC administrator can
close the respective sessions or all the sessions using the closessn subcommand. For more
information, see closessn.
Synopsis
racadm getssninfo [-u <username>] [-A]
Input
• -u — displays only sessions associated with a specific user.
• -A — does not display headers or labels.
Example
racadm getssninfo
Table 51. racadm getssninfo
SSNID Type User IP Address Login Date/Time
58999 SSH root 192.168.0.10 04/07/2016 12:00:34
Display the details of sessions without header
racadm getssninfo -A
"43584" "SSH" "root" "192.168.0.10" "04/07/2016 12:00:34"
getsvctag
Table 52. Details of getsvctag
Description
Displays the service tag of the host system.
RACADM Subcommand Details 75