CLI Guide
Synopsis
racadm lclog comment edit –q <sequence number> -m <Text to be added>
racadm lclog view -i <number of records> -a <agent id> -c <category> -s
<severity> -b <sub-category> -q <sequence no> -n <number of records> -r
<start timestamp> -e <end timestamp>
racadm lclog export -f <filename> -u <username> -p <password> -l <CIFS or NFS
or HTTP or HTTPS or TFTP or FTP share>
racadm lclog export -f <filename> -u <username> -p <password> -l <CIFS or NFS
or HTTP or HTTPS or TFTP or FTP share> --complete
racadm -r <idracip> -u <idrac username> -p <idrac password> lclog export\ -f
<filename> -u <username> -p <password> -l <CIFS or NFS or HTTP or HTTPS or
TFTP or FTP share>
racadm -r <idracip> -u <idrac username> -p <idrac password> lclog export\ -f
<filename> -u <username> -p <password> -l <CIFS or NFS or HTTP or HTTPS or
TFTP or FTP share> -- complete
racadm lclog viewconfigresult -j <job ID>
racadm lclog worknote add -m <text to be added>
Input
• -i—Displays the number of records present in the active log.
• -a—The agent ID used to filter the records. Only one agent ID is accepted. The value is case-insensitive. Valid
Agent-ID values:
• UEFI_SS_USC
• CusOsUp
• UEFI_Inventory
• iDRAC
• UEFI_DCS
• SEL
•
RACLOG
• DE
• WSMAN
• RACADM
• iDRAC_GUI
• -k—Filters the records based on the filter string provided in racadm lclog view command.
• -c — The category used to filter the records. Provides multiple categories using a "," as the delimiter. The value
is case-insensitive. Valid category values:
• System
• Storage
• Worknotes
• Config
• Updates
• Audit
• -b —The subcategory used to filter the records. Provides multiple subcategories using a "," as the delimiter.
• -q—The sequence number from which the records must be displayed. Records older than this sequence
number is displayed.
NOTE:
This parameter input is an integer. If an alphanumeric input is provided, then invalid
subcommand syntax error is displayed.
• -n—Specifies the n number of records that must be displayed. On Local RACADM, if this parameter is not
specified, by default 100 logs are retrieved.
90
RACADM Subcommand Details