White Papers

Configure SEKM by using a Server Configuration Profile (SCP)
41 Enable OpenManage Secure Enterprise Key Manager (SEKM) on Dell EMC PowerEdge Servers
Dell Customer Communication - Confidential
</SystemConfiguration>
The SCP file is located on HTTP share and imported by using the RACADM set command to import it.
8. After the SCP import job is marked as completed, verify configuration results to see what changes are applied.
9. Check storage configuration now to ensure that the PERC is in SEKM mode along with locked volume created.
C:\>racadm -r 100.65.99.179 -u root -p calvin --nocertwarn set -f 2019-5-17_135217_export.xml -t xml
-l http://100.65.84.72/http_share_vm
RAC977—Import configuration XML file operation initiated. Use the "racadm jobqueue view -i JID_581203847849"
command to view the status of the operation.
C:\>racadm -r 100.65.99.179 -u root -p calvin --nocertwarn jobqueue view -i JID_581203847849
---------------------------- JOB -------------------------
[Job ID=JID_581203847849]
Job Name=Configure: Import Server Configuration Profile
Status=Completed
Start Time=[Not Applicable]
Expiration Time=[Not Applicable]
Message=[SYS053: Successfully imported and applied Server Configuration Profile.]
Percent Complete=[100]
----------------------------------------------------------
C:\>racadm -r 100.65.99.179 -u root -p calvin --nocertwarn lclog viewconfigresult -j JID_581203847849
SeqNumber = 6094
FQDD = RAID.Slot.3-1
DisplayValue = PERC H740P Adapter
Name = PERC H740P Adapter
Status = Success
DisplayValue = PERC H740P Adapter
Name = PERC H740P Adapter
Status = Success
DisplayValue = SCP VD
Name = SCP VD
NewValue = RAID 1
NewValue = Physical Disk 0:1:0
NewValue = Physical Disk 0:1:1
NewValue = Virtual Disk Size in Bytes : 899527213056
NewValue = Virtual Disk Stripe Size : 256 Kb
NewValue = Physical Disks per Span : 2
NewValue = VirtualDisk Lock status: Locked
Status = Success
DisplayValue = RAIDbootVD
Name = RAIDbootVD
OldValue = None