Reference Guide

iDRAC.Security.CsrSubjectAltName (Read or Write)
Description
Specifies the CSR Subject Alternative Name
Legal Values
• String of up to 1024 ASCII characters.
Default Value None
Write Privilege Configure iDRAC
License Required iDRAC Basic
Dependancy None
iDRAC.Security.FIPSMode (Read or Write)
Description
Enables or Disables the FIPS mode compliance. Enabling FIPS mode resets iDRAC configuration to factory
defaults.
Legal Values
• Disabled-0
• Enabled-1
Default Value 0
Write Privilege Configure iDRAC
License Required iDRAC Basic
Dependancy None
NOTE: Setting FIPSMode to 0 - Disabled, will not have any effect.
NOTE: To disable FIPSmode, reset the iDRAC to factory default setting (racadm racresetcfg).
NOTE: If FIPS is enabled, you cannot perform any actions associated with the vFlash SD card, such as configuring the
vFlash SD card, exporting or backing up server profile to the vFlash, or importing server profile using vFlash.
iDRAC.SecurityCertificate
This group contains the attributes that provides details about iDRAC security certificate.
iDRAC.SecurityCertificate.CertificateType (Read Only)
Description
Specifies the type of certificate.
Legal Values
• SEKM_SSL_CERT-6
• KMS_SERVER_CA-7
• RSYSLOG_SERVER_CA-8
• BIOS_HTTPS_BOOT_CERT-9
Default Value 6
Write Privilege Configure iDRAC
License Required iDRAC Basic
Dependancy None
iDRAC Attributes 127