Users Guide

Table 44. Virtual/Remote-Assigned Address and Persistence Policy behavior
Remote assigned
Address Feature
State in OME
Modular
Mode set in iDRAC IO Identity Feature
State in iDRAC
SCP Persistence Policy Clear Persistence
Policy — Virtual
Address
Remote-Assigned
Address enabled
RemoteAssignedAdd
ress Mode
Enabled Virtual address
management (VAM)
configured
Configured VAM
persists
Set to Remote
assigned Address
Remote-Assigned
Address enabled
RemoteAssignedAdd
ress Mode
Enabled VAM not configured Set to Remote
assigned Address
No persistence — Is
set to Remote
assigned Address
Remote-Assigned
Address enabled
RemoteAssigned
Address Mode
Disabled Configured using the
path provided in
Lifecycle Controller
Set to Remote
assigned Address for
that cycle
No persistence — Is
set to Remote
assigned Address
Remote-Assigned
Address enabled
RemoteAssigned
Address Mode
Disabled VAM not configured Set to Remote
assigned Address
Set to Remote
assigned Address
Remote-Assigned
Address disabled
RemoteAssigned
Address Mode
Enabled VAM configured Configured VAM
persists
Persistence only —
clear is not possible
Remote-Assigned
Address disabled
RemoteAssigned
Address Mode
Enabled VAM not configured Set to hardware
MAC address
No persistence
supported. Depends
on card behavior
Remote-Assigned
Address disabled
RemoteAssigned
Address Mode
Disabled Configured using the
path provided in
Lifecycle Controller
Lifecycle Controller
configuration
persists for that
cycle
No persistence
supported. Depends
on card behavior
Remote-Assigned
Address disabled
RemoteAssigned
Address Mode
Disabled VAM not configured Set to hardware
MAC address
Set to hardware
MAC address
Remote-Assigned
Address enabled
Console Mode Enabled VAM configured Configured VAM
persists
Both persistence and
clear must work
Remote-Assigned
Address enabled
Console Mode Enabled VAM not configured Set to hardware
MAC address
Set to hardware
MAC address
Remote-Assigned
Address enabled
Console Mode Disabled Configured using the
path provided in
Lifecycle Controller
Lifecycle Controller
configuration
persists for that
cycle
No persistence
supported. Depends
on card behavior
Remote-Assigned
Address disabled
Console Mode Enabled VAM configured Configured VAM
persists
Both persistence and
clear must work
Remote-Assigned
Address disabled
Console Mode Enabled VAM not configured Set to hardware
MAC address
Set to hardware
MAC address
Remote-Assigned
Address disabled
Console Mode Disabled Configured using the
path provided in
Lifecycle Controller
Lifecycle Controller
configuration
persists for that
cycle
No persistence
supported. Depends
on card behavior
Remote-Assigned
Address enabled
Console Mode Disabled VAM not configured Set to hardware
MAC address
Set to hardware
MAC address
Inventorying, monitoring, and configuring network devices 185