Image Assist Static for Single Platform Version 10.0 User's Guide June 2021 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2020 - 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Introduction................................................................................................................. 4 Image Assist Static..............................................................................................................................................................4 Supported operating system and recommended framework....................................................................................4 New and enhanced features......................
1 Introduction Image Assist is a tool set that enables you to use Dell imaging services to quickly create and maintain a ready-to-deploy Microsoft Windows image. Depending on your requirement, you can either use Image Assist Static or Image Assist Dynamic to create an image. To use Image Assist Dynamic, install the Image Assist Dynamic tool. Image Assist Static The Image Assist Static tool enables you to create and capture a Microsoft Windows image for a single platform.
2 Getting started with Image Assist This section provides information about setting up your system, downloading Image Assist, and installing it. Setting up your system To create an image, you can use Dell OptiPlex, Dell Latitude, and Dell Precision systems, on which imaging is an option. NOTE: Ensure that the system that you order from Dell and the build base are of the same model and have the same configuration. Before you begin using Image Assist, ensure that you: ● Use the Windows 10 operating system.
Results After the installation is complete, the Welcome to Image Assist Static page is displayed.
3 Using Image Assist Static To create a ready-to-deploy Windows image, you must: 1. 2. 3. 4. Create a bootable Image Assist Static USB drive on page 7. Capture Static image on page 7. Restore and test image on page 8. Submit the image to the Dell factory for deploying the image to Dell systems. NOTE: To create a Dynamic image, click Dynamic.
Restore and test image Restoring an image enables you to test your Static image before submitting it to the Dell factory. Steps 1. Boot to the Image Assist Static USB drive. 2. On the Welcome to Image Assist Static WinPE page, in the Restore Image card, click RESTORE. The Restore Image page is displayed. 3. Click BROWSE, select the WIM file that you want to restore, and then click OK. 4. To edit the partitions, click EDIT PARTITIONS. 5. Click RESTORE IMAGE.
4 Related documents In addition to this guide, you can access the following documents for more information about Image Assist. Table 1. Related documents Document title Image Assist Dynamic for Single Platform Online Help Image Assist Dynamic for Multiple Platforms Online Help Image Assist Dynamic for Multiple Platforms User's Guide How to access the document Click on the Image Assist Static home page. Click on the Image Assist Dynamic home page. See the ImageAssist Documentation.
A Frequently asked questions 1. What is a Static image? A Static image is a single Windows image file that is generated by Image Assist. This image is similar to a Ghost image and contains a copy of the hard disk partitions and contents of a specific system. 2. When should I use the Image Assist Static tool? Use the Image Assist Static tool to capture customized Windows environments for reimaging to identical hardware configurations. 3.
B Glossary The following table describes the terms used in this guide: Table 2. Glossary Term Description Image The image is a file encapsulating the operating system, software, and settings configured on the system. Static image The Static image is an image produced at the end of the Image Assist Static process. This image can be used in the Dell factory for shipping compatible systems. It can also be used to reimage your systems onsite by using the bootable USB drive created by Image Assist Static.