Service Manual
:
.
.
www.dell.com/regulatory_compliance .
Procedure
1 Place the power-adapter port into the slot on the palm-rest and
keyboard assembly.
2 Align the screw hole on the power-adapter port with the screw hole on
the palm-rest and keyboard assembly.
3 Replace the screw that secures the power-adapter port to the palm-rest
and keyboard assembly.
4 Connect the power-adapter port cable to the system board.
Post-requisites
1 Replace the battery.
2 Follow the procedure from step 2 to step 4 in “Replacing the base cover.”
34