Service Manual
:
.
.
www.dell.com/regulatory_compliance .
Procedure
1 Slide the tabs on the touch pad into the slots on the palm-rest and
keyboard assembly.
2 Align the screw holes on the touch pad with the screw holes on the
palm-rest and keyboard assembly.
3 Replace the screws that secure the touch pad to the palm-rest and
keyboard assembly.
4 Adhere the tape to the touch pad.
5 Slide the touch-pad cable into the connector on the touch pad and close
the latch to secure the cable.
Post-requisites
1 Replace the battery.
2 Follow the procedure from step 2 to step 4 in “Replacing the base cover.”
49