Service Manual
:
.
.
www.dell.com/regulatory_compliance .
:
.
BIOS
.
:
BIOS
BIOS .
.
Procedure
1 Align the screw holes on the system board with the screw holes on the
palm-rest and keyboard assembly.
2 Replace the screw that secures the system board to the palm-rest and
keyboard assembly.
3 Slide the touch-pad cable and keyboard cable into their connectors and
close the latches to secure the cables.
4 Connect the power-adapter port cable, speaker cable, and coin-cell
battery cable to their connectors on the system board.
5 Slide the display cable into the connector on the system board and close
the latch to secure the cable.
6 Slide the display-cable bracket into the slot on the palm-rest and
keyboard assembly.
7 Align the screw hole on the display-cable bracket with the screw hole on
the system board.
8 Replace the screw that secures the display-cable bracket to the system
board.
Post-requisites
1 Replace the hard drive.
2 Replace the wireless card.
3 Replace the heat sink.
4 Replace the memory module.
5 Replace the battery.
6 Follow step 4 in “Replacing the I/O board.”
63