Service Manual

Removing the eMMC-card

assembly

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in Before

working inside your computer. After working inside your computer, follow

the instructions in After working inside your computer. For more safety best

practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance.

Prerequisites

NOTE: The computer is shipped with either hard-drive assembly or eMMC-

card assembly depending on the configuration ordered.

1 Follow the procedure from step 1 to step 6 in “Removing the base cover”.

2 Remove the battery.

Procedure

1 Remove the screws that secure the eMMC-card assembly to the palm rest and

keyboard assembly.