Service Manual

Replacing the eMMC-card
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Align the screw holes on the eMMC-card assembly with the screw holes on the
palm rest and keyboard assembly.
2 Replace the screws that secure the eMMC-card assembly to the palm rest and
keyboard assembly.
Post-requisites
1 Replace the battery.
2 Follow the procedure from step 2 to step 5 in “Replacing the base cover”.
39