Service Manual

Replacing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Adhere the display cable to the display back-cover and antenna assembly.
2 Connect the camera cable to the camera.
3 Using the alignment post place the camera module on the display back-cover
and antenna assembly.
4 Adhere the camera to the display back-cover and antenna assembly and snap
the camera into place.
Post-requisites
1 Replace the display panel.
2 Replace the display bezel.
3 Replace the display hinges.
4 Replace the wireless card.
5 Replace the battery.
6 Follow the procedure from step 2 to step 5 in “Replacing the base cover”.
83