Service Manual

Removing the display back-cover

and antenna assembly

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in Before

working inside your computer. After working inside your computer, follow

the instructions in After working inside your computer. For more safety best

practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance.

Prerequisites

1 Follow the procedure from step 1 to step 6 in “Removing the base cover”.

2 Remove the battery.

3 Remove the wireless card.

4 Remove the display hinges.

5 Remove the display bezel.

6 Remove the display panel.

7 Remove the camera.

Procedure

After performing the steps in prerequisites we are left with the display back-cover

and antenna assembly.