Service Manual

Memasang kembali port

adaptor daya

PERINGATAN: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before working inside your computer. After working inside your

computer, follow the instructions in After working inside your

computer. For more safety best practices, see the Regulatory

Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Place the power-adapter port into the slot on the palm rest and keyboard

assembly.

2 Align the screw hole on the power-adapter port with the screw hole on

the palm rest and keyboard assembly.

3 Replace the screw that secures the power-adapter port to the palm rest

and keyboard assembly.

4 Connect the power-adapter port cable to the system board.

Post-requisites

1 Replace the battery.

2 Follow the procedure from step 2 to step 5 in “Replacing the base cover”.