Service Manual

Melepaskan kamera

PERINGATAN: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before working inside your computer. After working inside your

computer, follow the instructions in After working inside your

computer. For more safety best practices, see the Regulatory

Compliance home page at www.dell.com/regulatory_compliance.

Prerequisites

1 Follow the procedure from step 1 to step 6 in “Removing the base cover”.

2 Remove the battery.

3 Remove the wireless card.

4 Remove the display hinges.

5 Remove the display bezel.

6 Remove the display panel.

Procedure

CAUTION: Place the display-panel assembly on a soft and clean

surface to avoid scratching the display.

1 Using a plastic scribe, gently pry the camera from the display back-cover

and antenna assembly.