Service Manual

Removing the display back-

cover and antenna assembly

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in

Before working inside your computer. After working inside your

computer, follow the instructions in After working inside your

computer. For more safety best practices, see the Regulatory

Compliance home page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the base cover.

2 Remove the battery.

3 Remove the display assembly.

4 Follow the procedure from step 1 to 2 in “Removing the display panel”.

Procedure

After performing the steps in prerequisites we are left with the display back-

cover and antenna assembly.