Service Manual

Removing the memory modules

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in Before working inside your computer. After working inside your computer, follow the instructions in After

working inside your computer. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance.

Topics:

• Prerequisites

• Procedure

Prerequisites

1. Remove the base cover.

2. Remove the battery.

Procedure

1. Lift the Mylar to access the memory module.

Figure 4. Memory module

a. memory module

b. Mylar

2. Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot until the memory module pops

up.

3. Remove the memory module from the memory-module slot.

Removing the memory modules 17