Service Manual

Removing the coin-cell battery

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in Before working inside your computer. After working inside your computer, follow the instructions in After

working inside your computer. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance.

CAUTION: Removing the coin-cell battery resets the BIOS setup program’s settings to default. It is recommended that

you note the BIOS setup program’s settings before removing the coin-cell battery.

Topics:

• Prerequisites

• Procedure

Prerequisites

1. Remove the base cover.

2. Remove the battery.

Procedure

1. Disconnect the coin-cell battery cable from the I/O board.

2. Peel the coin-cell battery off the palm-rest assembly.

Figure 10. Coin-cell battery

I/O board 2. coin-cell battery cable

3. coin-cell battery 4. palm-rest assembly

24 Removing the coin-cell battery