Service Manual

Removing the wireless card

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in Before working inside your computer. After working inside your computer, follow the instructions in After

working inside your computer. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance.

Topics:

• Prerequisites

• Procedure

Prerequisites

1. Remove the base cover.

2. Remove the battery.

Procedure

1. Remove the screw (M2x3.5) that secures the wireless-card bracket to the wireless card.

2. Disconnect the antenna cables from the wireless card.

3. Slide and remove the wireless card from the wireless-card slot.

Figure 11. Wireless card

screw (M2x3.5) 2. wireless-card bracket

3. wireless-card slot 4. wireless card

5. antenna cables (2)

26 Removing the wireless card