Service Manual

Replacing the status-light board

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in Before working inside your computer. After working inside your computer, follow the instructions in After

working inside your computer. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance.

Topics:

• Procedure

• Post-requisites

Procedure

1. Align and place the status-light board in the slot on the palm-rest assembly.

2. Slide the status-light board-cable into the connector on the keyboard daughter-board and close the latch to secure the cable.

3. Adhere the tape that secures the speaker cable to the palm-rest assembly.

Post-requisites

1. Replace the battery.

2. Replace the base cover.

Replacing the status-light board 43