Service Manual

Removing the display panel

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in Before working inside your computer. After working inside your computer, follow the instructions in After

working inside your computer. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance.

Topics:

• Prerequisites

• Procedure

Prerequisites

1. Remove the base cover.

2. Remove the battery.

3. Remove the display assembly.

Procedure

1. Remove the display cable from the routing guides inside the hinge covers.

2. Using a plastic scribe, pry the display-panel assembly off the display back-cover and antenna assembly.

Figure 30. Display panel

plastic scribe 2. display back-cover

3. routing guides 4. display cable

5. hinge covers 6. display panel

3. Turn over the display-panel assembly.

Removing the display panel 61