Service Manual

Replacing the display panel

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in Before working inside your computer. After working inside your computer, follow the instructions in After

working inside your computer. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance.

Topics:

• Procedure

• Post-requisites

Procedure

1. Place the display panel on a flat surface.

2. Replace the sensor board.

3. Replace the camera.

4. Turn over the display-panel assembly.

5. Route the display cable through the routing guides inside the hinge covers.

6. Align the display-panel assembly with the display back-cover and antenna assembly and gently snap the display-panel assembly into

place.

Post-requisites

1. Replace the display assembly.

2. Replace the battery.

3. Replace the base cover.

Replacing the display panel 63