Service Manual

Removing the display back-cover and antenna

assembly

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in Before working inside your computer. After working inside your computer, follow the instructions in After

working inside your computer. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance.

Topics:

• Prerequisites

• Procedure

Prerequisites

1. Remove the base cover.

2. Remove the battery.

3. Remove the display assembly.

4. Follow the procedure from step 1 to 2 in “Removing the display panel”.

Procedure

After performing the steps in prerequisites we are left with the display back-cover and antenna assembly.

Figure 33. Display back-cover and antenna assembly

1. display back-cover and antenna assembly

2. antenna cables

Removing the display back-cover and antenna assembly 67