Owner's Manual

Installing the Hard Drive

1. Place the hard drive assembly into its slot on the computer.

2. Install:

a) battery

b) base cover

3. Follow the procedures in

After Working Inside Your Computer.

Removing the Coin-Cell Battery

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove :

a) base cover

b) battery

3. Perform the steps as shown in the illustration:

a) Disconnect the coin-cell battery cable from its connector on the system board.

b) Unroute the coin-cell battery cable from the routing channel.

c) Lift and remove the coin-cell from the computer.

Installing the Coin-Cell Battery

1. Place the coin-cell battery into its slot on the computer.

2. Route the coin-cell battery cable along the routing channel.

3. Connect the coin-cell battery cable to its connector on the system board.

4. Install :