User guide

38 Hot-Key Board
Replacing the Hot-Key Board
1 Follow the instructions in "Before You Begin" on page 9.
2 Align the slots on the hot-key board with the alignment posts on the palm-
rest assembly and replace the screw.
3 Route the hot-key board cable through the slot on the palm-rest assembly.
4 Turn the palm-rest assembly over.
5 Replace the palm-rest assembly (see "Replacing the Palm-Rest Assembly"
on page 35).
6 Replace the keyboard (see "Replacing the Keyboard" on page 29).
7 Follow the instructions from step 4 to step 5 in "Replacing the Optical
Drive" on page 21.
8 Replace the module cover (see "Replacing the Module Cover" on page 18).
9 Replace the battery (see "Replacing the Battery" on page 16).
1 screw 2 hot-key board
3 hot-key board cable
1
2
3