Service manual

Memory Module, Mini PCI Card, Modem, and Modules: Dell Inspiron 8500/8600 Service Manual
1 securing clips (2 per
connector)
2 memory module
NOTICE: If you need to install memory modules in two connectors, install a
memory module in the connector labeled "DIMMA (Slot 1)" before you install a
module in the connector labeled "DIMMB."
4. Ground yourself and install the new memory module:
a. Align the notch in the module with the slot in the center of the connector.
b. Slide the edge of the module firmly into the connector, and rotate the
module down until you feel a click. If you do not feel the click, remove the
module and reinstall it.
NOTE: If the memory module is not installed properly, the computer does not
boot. The Num Lock and Scroll Lock lights blink about ten times.
5. Replace the cover and screw.
file:///F|/Service%20Manuals/Dell/Inspiron/85-8600/upgrades.htm (3 of 13) [2/28/2004 6:29:46 AM]