Service manual

Display Assembly: Dell Inspiron 8500/8600 Service Manual
Display Bezel
CAUTION: Before performing the following procedures, read the safety
instructions in your Owner's Manual.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as
the back panel) on the computer.
1. Follow the instructions in "
Preparing to Work Inside the Computer."
2. Remove the
central control cover.
3. Remove the
display assembly.
4. Use a plastic scribe to pry the eight display bumpers out of the screw holes
located on the front of the bezel.
5. Remove the eight M2.5 x 6-mm screws located on the front of the bezel.
NOTICE: Carefully separate the bezel from the top cover to avoid damage to
the bezel.
6. Starting at the bottom of the display panel (by the DELL™ logo), use your
fingers to separate the bezel from the top cover by lifting the inside edge of the
bezel away from the top cover.
Display Panel
CAUTION: Before performing the following procedures, read the safety
instructions in your Owner's Manual.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by touching an unpainted metal surface on the computer.
file:///F|/Service%20Manuals/Dell/Inspiron/85-8600/display.htm (5 of 8) [2/28/2004 6:32:41 AM]