Service Manual

Removing the display panel

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in Before working inside your computer. After working inside your computer, follow the instructions in After

working inside your computer. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance.

Prerequisites

1. Remove the base cover.

2. Remove the battery.

3. Remove the display assembly.

Procedure

1. Remove the display cable from inside the hinge covers.

2. Using a plastic scribe, pry up the display-panel assembly to release the tabs that secure display-panel assembly to the display back-

cover and antenna assembly.

Figure 32. Removing the display back cover and antenna assembly

display-panel assembly 2. plastic scribe

3. hinge covers (2) 4. display cable

5. display back-cover and antenna assembly

3. Remove the camera.

4. Remove the sensor board.

5. Remove the display cable.

58 Removing the display panel