Service Manual

Replacing the keyboard
daughter-board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Adhere the keyboard daughter-board to the palm-rest assembly.
2 Slide the keyboard cables, keyboard-backlight cable, status-light board
cable, and the touch-pad cable into their respective connectors on the
keyboard daughter-board, and then close the latches to secure the
cables.
Post-requisites
1 Replace the battery.
2 Replace the base cover.
40