Owner's Manual

68 Camera Module
Replacing the Camera Module
1 Follow the instructions in "Before You Begin" on page 9.
2 Connect the camera cable to the connector on the camera module.
3 Use the alignment posts on the display cover to snap the camera module
into position.
4 Replace the display bezel (see "Replacing the Display Bezel" on page 62).
5 Replace the display assembly (see "Replacing the Display Assembly" on
page 60).
6 Replace the hinge cover (see "Replacing the Hinge Cover" on page 55).
7 Follow the instructions from step 3 to step 7 in "Replacing the Palm-Rest
Assembly" on page 32.
8 Replace the battery (see "Replacing the Battery" on page 14).
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
1 display cover 2 tabs (2)
3 camera module 4 camera cable
2
3
4
1