Service Manual

44 Display
5 Connect the display cable and touch-screen cable to the connectors on the
system board.
6 Follow the instructions from step 2 to step 7 in "Replacing the Palm-Rest
Assembly" on page 34.
7 Replace the two screws that secure the display assembly to the computer
base.
8 Replace the battery (see "Replacing the Battery" on page 16).
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
Display Bezel
Removing the Display Bezel
1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the top cover (see "Removing the Top Cover" on page 13).
3 Remove the display assembly (see "Removing the Display Assembly" on
page 41).
CAUTION: The display bezel is extremely fragile. Be careful when removing it to
prevent damaging the display bezel.
4 Using your fingertips, carefully pry up the inside edge of the display bezel.
5 Remove the display bezel.