Service Manual

80 Processor Module

Replacing the Processor Module

Follow the instructions in "Before You Begin" on page 9.

NOTE: If a new processor is installed, you will receive a new thermal-cooling

assembly, which will include an affixed thermal pad, or you will receive a new

thermal pad along with documentation to illustrate proper installation.

Align the pin-1 corner of the processor module with the pin-1 corner of the

ZIF socket, then insert the processor module.

NOTE: The pin-1 corner of the processor module has a triangle that aligns with the

triangle on the pin-1 corner of the ZIF socket.

1 ZIF socket 2 processor module

3 pin-1 corner 4 ZIF-socket cam screw