Laptop User Manual

Adding and Replacing Parts 143
Replacing the Optical Drive
1 Slide the optical drive into the bay.
2 Replace and tighten the locking screw.
Hinge Cover
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE: To help prevent damage to the system board, you must remove the battery
from the battery bay before you begin working inside the computer.
1 optical drive 2 notch
3 locking screw
3
1
2