Laptop User Manual

Adding and Replacing Parts 161
3 Connect the black antenna cable with a gray stripe to the connector
labeled "aux" (black triangle) and connect the white antenna cable with a
gray stripe to the connector labeled "main" (white triangle).
4 Secure unused antenna cables in the protective mylar sleeve.
5 Replace the cover and tighten the captive screws.
Removing a WPAN Card
1 Follow the procedures in "Before You Begin" on page 137.
2 Turn the computer over.
3 Loosen the captive screws on the cover of the Mini Card compartment and
remove the cover.
4 Disconnect the blue antenna cable from the WPAN card.
5 Release the WPAN card by pushing the metal securing tabs toward the
back of the computer until the card pops up slightly.
6 Lift the WPAN card out of its system board connector.
1 captive screws (2) 2 cover
1
2