Laptop User Manual

Using ExpressCards 81

The computer recognizes the ExpressCard and automatically loads the

appropriate device driver. If the configuration program tells you to load the

manufacturer's drivers, use the media that came with the ExpressCard.

Removing an ExpressCard or Blank

CAUTION: Before you begin any of the procedures in this section, follow the

safety instructions in the Product Information Guide.

Press the latch and remove the card or blank. For some latches, you must press

the latch twice, once to pop the latch out, and then a second time to pop the

card out.

Save a blank to use when no ExpressCard is installed in a slot. Blanks protect

unused slots from dust and other particles.

1 release button