Operation Manual

22 | Removing the Memory Module(s)
Removing the Memory Module(s)
WARNING: Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before Working Inside Your
Computer" on page 9. After working inside your computer, follow the instructions
in "After Working Inside Your Computer" on page 11. For additional safety best
practices information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the battery. See "Removing the Battery" on page 12.
2 Remove the base cover. See "Removing the Base Cover" on page 20.
Procedure
1 Use your fingertips to carefully spread apart the securing-clips on each end of the
memory-module connector until the memory module pops up.
2 Slide and remove the memory module from the memory-module connector.
1 memory-module connector 2 securing-clips (2)
3memory module
2
3
1
book.book Page 22 Thursday, July 4, 2013 10:56 AM