Manual

50 Hard Drive
5 Remove the palm-rest assembly (see "Removing the Palm-Rest Assembly"
on page 31).
6 Remove the three screws that secure the hard-drive assembly to the
computer base.
7 Slide the hard-drive assembly to disconnect it from the connector on the
system board.
8 Lift the hard-drive assembly out of the computer base.
CAUTION: When the hard drive is not in the computer, store it in protective
antistatic packaging (see "Protecting Against Electrostatic Discharge" in the
safety instructions that shipped with your computer).
2
1
book.book Page 50 Friday, April 13, 2012 2:02 PM