Inspiron 15 3000 Series Service Manual Regulatory Model: P47F Regulatory Type: P47F003
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2016 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Before working inside your computer............................................................................................. 7 Before you begin ...................................................................................................................................................................7 Safety instructions.................................................................................................................................................................
Post-requisites.....................................................................................................................................................................20 13 Removing the keyboard..............................................................................................................21 Prerequisites.........................................................................................................................................................................
Post-requisites.....................................................................................................................................................................38 25 Removing the system board...................................................................................................... 39 Prerequisites........................................................................................................................................................................ 39 Procedure.
Post-requisites.....................................................................................................................................................................55 37 Removing the display panel....................................................................................................... 56 Prerequisites........................................................................................................................................................................
1 Before working inside your computer NOTE: The images in this document may differ from your computer depending on the configuration you ordered. Topics: • • • Before you begin Safety instructions Recommended tools Before you begin 1. Save and close all open files and exit all open applications. 2. Shut down your computer. The shut-down instruction varies depending on the operating system installed on your computer. • Windows 10: Click Start > Power > Shut down. • • Windows 8.
disconnecting cables, keep them evenly aligned to avoid bending any connector pins. When connecting cables, ensure that the ports and connectors are correctly oriented and aligned. CAUTION: Press and eject any installed card from the media-card reader.
2 After working inside your computer CAUTION: Leaving stray or loose screws inside your computer may severely damage your computer. 1. Replace all screws and ensure that no stray screws remain inside your computer. 2. Connect any external devices, peripherals, or cables you removed before working on your computer. 3. Replace any media cards, discs, or any other parts that you removed before working on your computer. 4. Connect your computer and all attached devices to their electrical outlets. 5.
3 Removing the battery NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure Procedure 1. Close the display and turn the computer over. 2.
4 Replacing the battery NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
5 Removing the base panel NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Prerequisites Procedure Prerequisites Remove the battery. Procedure 1.
6 Replacing the base panel NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Procedure Post-requisites Procedure 1.
7 Removing the hard drive NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.
1. hard drive 2. screws (4) 3. hard-drive bracket 4.
8 Replacing the hard drive NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.
9 Removing the memory module NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Prerequisites Procedure Prerequisites 1. Remove the battery. 2. Remove the base panel.
10 Replacing the memory module NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Procedure Post-requisites Procedure 1.
11 Removing the wireless card NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Prerequisites Procedure Prerequisites 1. Remove the battery. 2. Remove the base panel.
12 Replacing the wireless card NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
13 Removing the keyboard NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Prerequisites Procedure Prerequisites Remove the battery. Procedure 1.
1. latch 2. keyboard cable 3. palm-rest assembly 4. keyboard 5. Lift the keyboard, along with the cable, off the palm-rest assembly.
14 Replacing the keyboard NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Procedure Post-requisites Procedure 1.
15 Removing the palm rest NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Prerequisites Procedure Prerequisites 1. Remove the battery. 2. Remove the base panel. 3.
5. Remove the screws that secure the palm-rest assembly to the computer base. 1. screws (10) 2. computer base 6. Slightly open the computer base and, using a plastic scribe, pry the palm-rest assembly off the computer base. 1. computer base 2. palm-rest assembly 3. plastic scribe 7. Turn the computer over and open the display. 8. Lift the palm-rest assembly off the computer base.
1. palm-rest assembly 9. Remove the touch pad. 26 Removing the palm rest 2.
16 Replacing the palm rest NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Procedure Post-requisites Procedure 1. Replace the touch pad. 2.
17 Removing the touch pad NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Prerequisites Procedure Prerequisites 1. Remove the battery. 2. Remove the base panel. 3.
1. touch-pad cable 2. latch 3. screws (2) 4. palm rest 5. touch-pad bracket 4. Peel the tape off the touch pad. 5. Lift the touch pad off the palm rest. 1. tape 2. touch pad 3.
18 Replacing the touch pad NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Procedure Post-requisites Procedure 1.
19 Removing the power-button board NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Prerequisites Procedure Prerequisites 1. Remove the battery. 2. Remove the base panel.
1. power-button board 3. power-button board cable 32 Removing the power-button board 2.
20 Replacing the power-button board NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Procedure Post-requisites Procedure 1.
21 Removing the speakers NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Prerequisites Procedure Prerequisites 1. Remove the battery. 2. Remove the base panel. 3.
1. speaker cable 2.
22 Replacing the speakers NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Procedure Post-requisites Procedure 1.
23 Removing the I/O board NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Prerequisites Procedure Prerequisites 1. Remove the battery. 2. Remove the base panel. 3.
24 Replacing the I/O board NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Procedure Post-requisites Procedure 1.
25 Removing the system board NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. NOTE: Your computer’s Service Tag is stored in the system board.
1. speaker cable 2. slot 2. Turn the computer over and open the display as far as possible. 3. Peel the tape that secures the display cable to the system board. 4. Open the latches and disconnect the display cable and I/O-board cable from the system board. 5. Disconnect the power-adapter port cable from the system board. 1. system board 2. tape 3. display cable 4. latch 5. I/O-board cable 6. power-adapter port cable 6. Remove the screw that secures the system board to the computer base. 7.
1. system board 2. computer base 3. screw 8. Turn the system board over and remove the coin-cell battery. 9. Follow the procedure from step 2 to step 4 in "Removing the heat sink”.
26 Replacing the system board NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. NOTE: Your computer’s Service Tag is stored in the system board.
27 Removing the coin-cell battery NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Removing the coin-cell battery resets the BIOS setup program’s settings to default.
28 Replacing the coin-cell battery NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
29 Removing the heat sink NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. NOTE: The heat sink may become hot during normal operation.
1. heat sink 2. captive screws (4) 3. system board 4. fan cable 5. fan 4. Lift the cooling assembly off the system board. 5. Remove the fan.
30 Replacing the heat sink NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Incorrect alignment of the heat sink can damage the system board and processor.
31 Removing the fan NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Prerequisites Procedure Prerequisites 1. Remove the battery. 2. Remove the base panel. 3.
1. cooling assembly 2. fan 3. screws (3) 2. Turn the cooling assembly over. 3. Lift the fan off the heat sink. 1. heat sink 2.
32 Replacing the fan NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Procedure Post-requisites Procedure 1. Place the fan on the heat sink. 2.
33 Removing the display assembly NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Prerequisites Procedure Prerequisites 1. Remove the battery. 2. Remove the base panel. 3.
1. display assembly 2. display cable 3. computer base 4. antenna cables (2) 4. Remove the screws that secure the display hinges to the computer base. 1. display assembly 3. computer base 5. Carefully lift the display assembly off the computer base. 52 Removing the display assembly 2.
34 Replacing the display assembly NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Procedure Post-requisites Procedure 1.
35 Removing the display bezel NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
36 Replacing the display bezel NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
37 Removing the display panel NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
3. display-back cover 3. Peel the tape that secures the display cable to the display-back cover. 4. Open the latch and disconnect the display cable from the display-back cover. 5. Lift the display panel off the display back-cover. 1. display panel 2. display cable 3. latch 4. tape 5.
38 Replacing the display panel NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Procedure Post-requisites Procedure 1.
39 Removing the power-adapter port NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Prerequisites Procedure Prerequisites 1. Remove the battery. 2. Remove the base panel.
40 Replacing the power-adapter port NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Procedure Post-requisites Procedure 1.
41 Removing the camera NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
1. camera cable 3. camera 62 Removing the camera 2.
42 Replacing the camera NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Procedure Post-requisites Procedure 1. Connect the camera cable to the camera. 2.
43 Removing the display hinges NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
1. screws (6) 2. latches (2) 3. display hinges (2) 4.
44 Replacing the display hinges NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • • Procedure Post-requisites Procedure 1.
45 Flashing the BIOS You may need to flash (update) the BIOS when an update is available or when you replace the system board. To flash the BIOS: 1. Turn on your computer. 2. Go to www.dell.com/support. 3. Click Product support, enter the Service Tag of your computer, and then click Submit. NOTE: If you do not have the Service Tag, use the auto-detect feature or manually browse for your computer model. 4. Click Drivers & downloads > Find it myself. 5. Select the operating system installed on your computer.
46 Getting help and contacting Dell Self-help resources You can get information and help on Dell products and services using these self-help resources: Information about Dell products and services www.dell.com Windows 8.1 and Windows 10 Dell Help & Support app Windows 10 Get started app Windows 8.1 Help + Tips app Accessing help in Windows 8, Windows 8.1, and Windows 10 In Windows search, type Help and Support, and press Enter. Accessing help in Windows 7 Click Start > Help and Support.
