Inspiron 3668 Servicemanual Computermodel: Inspiron 3668 Forordningsmodel: D19M Forordningstype: D19M003
Bemærk, forsigtig og advarsel BEMÆRK: En BEMÆRKNING angiver vigtige oplysninger om, hvordan du bruger produktet optimalt. FORSIGTIG: FORSIGTIG angiver enten en mulig beskadigelse af hardware eller tab af data og oplyser dig om, hvordan du kan undgå dette problem. ADVARSEL: ADVARSEL angiver risiko for tingskade, personskade eller død. © 2017-2019 Dell Inc. eller dets datterselskaber. Alle rettigheder forbeholdes. Dell, EMC, og andre varemærker er varemærker tilhørende Dell Inc.
Indholdsfortegnelse Før du udfører arbejde på computerens indvendige dele............................................................................... 9 Før du starter........................................................................................... 9 Efter du har udført arbejde på computerens indvendige dele............................................................10 Sikkerhedsinstruktioner................................................11 Anbefalet værktøj....................................
Genmontering af frontfacetten....................................23 Procedure...............................................................................................23 Efterfølgende forudsætninger................................................................ 23 Fjernelse af hukommelsesmodulerne........................... 24 Forudsætninger......................................................................................24 Procedure................................................................
Genplacering af 2,5" harddisk..................................... 43 Procedure...............................................................................................43 Efterfølgende forudsætninger................................................................ 43 Fjernelse af det optiske drev....................................... 44 Forudsætninger......................................................................................44 Procedure......................................................
Sådan genmonteres antennemodulerne.......................60 Procedure.............................................................................................. 60 Efterfølgende forudsætninger................................................................ 60 Fjernelse af strømknapmodulet.................................... 61 Forudsætninger...................................................................................... 61 Procedure..................................................................
Genmontering af processorblæseren........................... 74 Procedure............................................................................................... 74 Efterfølgende forudsætninger.................................................................74 Sådan fjernes processorens kølelegeme...................... 75 Forudsætninger......................................................................................75 Procedure....................................................................
Sådan opdateres BIOS'en............................................96 Rekvirere hjælp og kontakte Dell................................. 97 Selv-hjælpsressourcer............................................................................ 97 Kontakt Dell............................................................................................
Før du udfører arbejde på computerens indvendige dele BEMÆRK: Billederne i dette dokument kan afvige fra din computer afhængigt af den bestilte konfiguration. Før du starter 1 Gem og luk alle åbne filer, og luk alle åbne programmer. 2 Sluk computeren. Klik på Start Tænd/sluk Luk computeren. BEMÆRK: Hvis du bruger et andet operativsystem, se i dokumentationen for dit operativsystem for vejledning ved nedlukning. 3 Tag stikkene til computeren og alle tilsluttede enheder ud af stikkontakterne.
Efter du har udført arbejde på computerens indvendige dele FORSIGTIG: Det kan beskadige computeren alvorligt at efterlade bortkomme eller løse skruer inde i computeren. 1 Genmonter alle skruer, og sørg for, at der ikke findes nogen løse skruer inde i computeren. 2 Tilslut alle eksterne enheder, perifert udstyr eller kabler, som du fjernede, før du begyndte at arbejde med computeren. 3 Genplacer alle mediekort, diske, eller alle andre dele, som du fjernede, før du begyndte at arbejde med computeren.
Sikkerhedsinstruktioner Følg sikkerhedsinstruktionerne med henblik på din egen sikkerhed og for at beskytte computeren og arbejdsmiljøet mod mulige skader. ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance. ADVARSEL: Alle strømkilder frakobles, inden computerens dæksel eller paneler åbnes.
FORSIGTIG: Tryk for at skubbe eventuelle installerede kort ud af mediekortlæseren.
Anbefalet værktøj Procedurerne i dette dokument kræver eventuelt følgende værktøj: • Phillips-skruetrækker nr.
Liste over skruer Den følgende tabel giver en liste over de skruer, du skal bruge til at fastgøre de forskellige komponenter i computeren. Tabel 1.
Sådan ser computeren ud indvendigt 1 systemkort 2 grafikkort (PCIe x 16) 3 processorblæser og kølelegememodul 4 hukommelsesmodul 5 optisk drev 6 3,5” harddiskmodul 7 2,5” harddiskmodul 8 sidechassis 9 trådløs-kort 10 strømforsyningsenhed 15
Systemkortkomponenter 1 strømknapkabelstik 2 strømkabelstik til optisk drev 3 SATA 1-stik 4 SATA 0-stik 5 SATA 2-stik 6 SATA 3-stik 7 trådløs-kortslot 8 strømkabelstik til harddisk 9 kabelstik til strømforsyningsenhed 10 møntcellebatteri 11 CMOS-jumper 12 adgangskodejumper 16
13 jumper til servicetilstand 14 grafikkortslot 15 PCIe x1 16 PCIe x1 17 stik til kabinetblæserens kabel 18 processorsokkel 19 stik til processorblæserens kabel 20 kabelstik til strømforsyningsenhed 21 hukommelsesmodulslots (2) 17
Fjernelse af computerdækslet ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
Genmontering af computerdækslet ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
Fjernelse af frontfacetten ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
Procedure 1 Tag fat i, og frigør frontfacettens tapper i rækkefølge fra toppen af, ved at bevæge dem udad fra chassiset.
2 22 Drej frontfacetten, og træk den væk fra computerens forside for at frigøre frontfacettens tapper fra åbningerne i frontpanelet.
Genmontering af frontfacetten ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
Fjernelse af hukommelsesmodulerne ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
2 Løft og vend sidechassiset væk fra computeren. FORSIGTIG: Hold hukommelsesmodulet på dets kanter for at undgå at beskadige det. Rør ikke ved komponenterne på hukommelsesmodulet. 3 Brug fingerspidserne til at sprede fastgørelsesklemmerne, ved hver ende af hukommelsesmodulslottet, indtil modulet springer op.
4 Løft hukommelsesmodulet ud af hukommelsesmodulslottet. BEMÆRK: Hvis du har problemer med at få hukommelsesmodulet ud, kan du forsigtigt bevæge det frem og tilbage for at lirke det ud af slottet.
Genmontering af hukommelsesmodulerne ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
3 Sæt hukommelsesmodulet ind i dets slot, tryk hukommelsesmodulet ned, til det klikker på plads og fastgørelsesklemmerne låser sig på plads. 4 Drej sidechassiset mod computeren, til det klikker på plads. 5 Anbring computeren i oprejst position. Efterfølgende forudsætninger Genmonter computerdækslet.
Fjernelse af grafikkortet ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
3 Løft tappen for at åbne kortklemmebeslaget. 4 Skub fastgørelsestappen på PCle-slottet væk fra grafikkortet.
5 Tag fat i kortets øverste hjørne, og træk det ud af slottet.
Genmontering af grafikkortet ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
Fjernelse af 3,5" harddisk ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
4 34 Frakobl strømkablet fra harddisken.
5 Løft og vend sidechassiset væk fra computeren.
6 Træk harddiskmodulet ud af åbningen i sidechassiset ved brug af frigørelsestapperne på harddiskmodulet. 7 Fjern de fire skruer ((#6-32xL3,6), der fastgør harddiskbeslaget til harddisken.
8 Løft harddisken af harddiskbeslaget.
Genplacering af 3,5" harddisk ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
Fjernelse af 2,5" harddisk ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
2 Løft og vend sidechassiset væk fra computeren. 3 Frakobl strømkablet fra harddisken. 4 Frakobl datakablet (SATA 1) fra harddisken. 5 Tryk på frigørelsestapperne på harddiskmodulet.
6 Træk harddiskmodulet ud af slottet i sidechassiset. 7 Lirk harddiskbeslaget for at frigøre tapperne på beslaget fra åbningerne i harddisken.
8 Løft harddisken af harddiskbeslaget. BEMÆRK: Bemærk orienteringen af harddisken så du kan sætte den korrekt tilbage.
Genplacering af 2,5" harddisk ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
Fjernelse af det optiske drev ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
3 Frakobl strømkablet fra det optiske drev. 4 Frakobl datakablet fra det optiske drev. 5 Drej sidechassiset mod computeren, til det klikker på plads. 6 Fjern skruen (#6-32xL3,6), der fastgør det optiske drevmodul til sidechassiset.
7 Træk forsigtigt det optiske drevmodul ud af den optiske drevbås igennem computerens forside. 8 Fjern de tre skruer (M2xL2), som fastgør det optiske drevbeslag på det optiske drev.
9 Løft det optiske drevbeslag af det optiske drev. 10 Træk forsigtigt i den optiske drevfacet og frakobl den fra det optiske drev.
Genmontering af det optiske drev ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
Sådan fjernes møntcellebatteriet ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
2 50 Løft og vend sidechassiset væk fra computeren.
3 Lirk vha. en plastikpen møntcellebatteriet ud af dets sokkel.
Genmontering af møntcellebatteriet ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
Fjernelse af trådløs-kortet ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
3 Fjern skruen (M2xL3,5), der fastgør trådløs-kortet til systemkortet. 4 Løft trådløs-kortets beslag af trådløs-kortet. 5 Frakobl antennekablerne fra trådløs-kortet. 6 Skub og fjern trådløs-kortet fra dets slot.
Genmontering af trådløs-kortet ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
5 Genmonter skruen (M2xL3,5), der fastgør trådløs-kortet til systemkortet. 6 Drej sidechassiset mod computeren, til det klikker på plads. 7 Anbring computeren i oprejst position. Efterfølgende forudsætninger Genmonter computerdækslet.
Sådan fjernes antennemodulerne ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
2 Skub forsigtigt antennekablerne ned igennem fremføringshullerne i sidechassiset. 3 Drej sidechassiset mod computeren, til det klikker på plads. 4 Bemærk fremføringen af antennekablerne og fjern antennekablerne fra kabelkanalerne på sidechassiset.
5 Brug en plastikpen til forsigtigt at lirke antennemodulerne af sidechassiset.
Sådan genmonteres antennemodulerne ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
Fjernelse af strømknapmodulet ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
3 Frakobl strømknapkablet fra systemkortet. 4 Tryk på tapperne på strømknapmodulet for at frigøre modulet fra frontpanelet. 5 Fjern strømknapmodulet sammen med dets kabel igennem åbningen i frontpanelet.
Genmontering af strømknapmodulet ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
Fjernelse af chassisblæseren ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
3 Frakobl chassisblæserens kabel fra systemkortet. 4 Fjern de fire skruer (#6-32xL6,35), som fastgør chassisblæseren til chassiset. 5 Fjern chassisblæseren fra chassiset.
Genmontering af chassisblæseren ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
Sådan fjernes strømforsyningsenheden ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
2 Løft og vend sidechassiset væk fra computeren. 3 Tryk på fastgørelsesklemmen og frakobl strømforsyningsenhedens kabel (ATX 2) fra systemkortet. 4 Tryk på fastgørelsesklemmen og frakobl strømforsyningsenhedens kabel (ATX 1) fra systemkortet.
5 Bemærk strømforsyningsenhedens kabelføring, og fjern kablet fra kabelkanalerne i chassiset. 6 Fjern de tre skruer (#6-32xL6,35), der fastgør strømforsyningsenheden til chassiset. 7 Tryk på klemmen og træk strømforsyningsenheden imod forsiden af chassiset for at frigøre den fra chassiset.
8 70 Løft strømforsyningsenheden med dens kabel af chassiset.
Genmontering af strømforsyningsenheden ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
Sådan fjernes processorblæseren ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
3 Frakobl processorblæserens kabel fra systemkortet. 4 Fjern de fire skruer (M6xL10), der fastgør processorblæseren til varme-sinket. 5 Løft processorblæseren af varme-sinket.
Genmontering af processorblæseren ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
Sådan fjernes processorens kølelegeme ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
2 76 Løft kølelegememodulet op fra systemkortet.
Genmontering af processorens kølelegeme ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
Fjernelse af systemkortet ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
3 Frakobl strømknapkablet fra systemkortet. 4 Frakobl det optiske drevs strømkabel fra systemkortet. 5 Frakobl harddiskens strømkabel og strømforsyningsenhedens kabel fra systemkortet. 6 Frakobl det optiske drevs datakabel og harddiskens datakabel fra systemkortet. 7 Fjern de otte skruer (#6-32xL6,35), som fastgør systemkortet til chassiset.
8 80 Løft systemkortet og fjern det fra chassiset.
Genmontering af systemkortet ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
BIOS-installationsprogram Oversigt over BIOS BIOS styrer datastrømmen mellem computerens operativsystem og de tilsluttede enheder, så som harddisk, videoadapter, tastatur, mus og printer. Sådan åbnes BIOS-installationsprogrammet 1 Tænd (eller genstart) computeren. 2 Under POST, når DELL-logoet vises, vent på at F2-prompten vises. Tryk derefter øjeblikkeligt på F2. BEMÆRK: F2-prompten viser at tastaturet er initialiseret.
General-System Information (Generelle systemoplysninger) Manufacture Date Viser computerens fremstillingsdato. Ownership Date Viser computerens ejerskabsdato. Express Service Code Viser computerens ekspresservicekode. Memory Information (Hukommelsesoplysninge r) Memory Installed Viser den samlede installerede computerhukommelse. Memory Available Viser den samlede tilgængelige computerhukommelse. Memory Speed Viser hukommelseshastigheden.
General-System Information (Generelle systemoplysninger) Processor L3 Cache Viser processorens L3-cache-lagerstørrelse. HT Capable Viser om hvorvidt processoren er HT-kompetent (HyperThreading). 64-Bit Technology Viser om der er anvendt 64–bit teknologi. Device Information (Enhedsoplysninger) SATA-0 Viser computerens SATA-0 enhedsoplysninger. SATA-1 Viser computerens SATA-1 enhedsoplysninger. SATA-2 Viser computerens SATA-2 enhedsoplysninger. SATA-3 Viser computerens SATA-3 enhedsoplysninger.
Tabel 3. Systeminstallationsindstillinger—System Configuration menu (Systemkonfigurationsmenuen) System Configuration (Systemkonfiguration) Integrated NIC Styrer den integrerede LAN-controller. Enable UEFI Network Stack (Aktiver UEFI netværksstak) Enable or disable UEFI Network Stack (Aktivere eller deaktivere UEFI netværksstack). SATA Operation Konfigurerer driftstilstanden for den integrerede SATA-harddiskcontroller. Drives Aktivere eller deaktivere forskellige indbyggede drev.
Tabel 4. Systeminstallationsindstillinger—Video menu (Videomenu) Video Multi-Display Aktivere eller deaktivere funktionen Multi-skærm. Primary Display Vælg den primære skærmcontroller. Tabel 5. Systeminstallationsindstillinger—Security menu (Sikkerhedsmenu) Security (Sikkerhed) 86 Admin Password Indstille, ændre eller slette administratoradgangskoden. System Password Indstille, ændre eller slette systemadgangskoden.
Security (Sikkerhed) Admin Setup Lockout Forhindre brugere i at åbne Setup (Installation), når der er indstillet en administratoradgangskode. Tabel 6. Systeminstallationsindstillinger—Secure Boot menu (Sikker startmenu) Secure Boot (Sikker opstart) Secure Boot Enable Aktiverer eller deaktiverer funktionen sikker start. Expert Key Management (Administration af ekspertnøgle) Enable Custom Mode Aktivere eller deaktivere brugerdefineret tilstand.
Intel Software Guard Extensions (Intel sikkerhedsudvidelse af software) C-States Control Aktivere eller deaktivere flere dvaletilstande for processoren. Standard: Enabled (Aktiveret) Limit CPUID Value Begrænser den maksimale værdi, som processorens CPUID-standardfunktion understøtter. Intel TurboBoost Aktivere eller deaktivere processorens Intel TurboBoost-tilstand.
Intel Software Guard Extensions (Intel sikkerhedsudvidelse af software) Standardindstilling: Enable Numlock (Aktiveret Num Lock) Keyboard Errors Aktivere eller deaktivere registrering af tastaturfejl. Standard: Enable Keyboard Error Detection (Aktiveret registrering af tastaturfejl). Fastboot Gør det muligt at indstille hastigheden for startprocessen. Standard: Thorough (Grundig). Tabel 8.
Maintenance (Vedligeholdelse) brugerens primære harddisk eller fra en ekstern USB-nøgle. Tabel 10. Systeminstallationsindstillinger—System Logs menu (System-logfilmenu) System Logs (Systemlogfiler) BIOS Events Viser BIOS-hændelser. Tabel 11.
2 Løft og vend sidechassiset væk fra computeren. 3 Find adgangskodejumperen på systemkortet. BEMÆRK: For flere oplysninger om placering af jumperen, se Systemkortkomponenter. 4 Fjern jumperstikket fra adgangskode-jumperbenene.
5 Vent 5 sekunder, og genplacer jumperstikket i dets oprindelige placering. 6 Drej sidechassiset mod computeren, til det klikker på plads. Efterfølgende forudsætninger 1 Genmonter frontfacetten. 2 Genmonter computerdækslet.
Rydning af CMOS-indstillinger ADVARSEL: Før du arbejder med computerens indvendige dele, skal du læse de sikkerhedsinstruktioner, der fulgte med computeren, og følge trinene i Før du arbejder med computerens indvendige dele. Efter du har arbejdet på computerens indvendige dele, følg vejledningen i Efter du har udført arbejde på computerens indvendige dele. For flere oplysninger om bedste praksis for sikkerhed, se hjemmesiden Regulatory Compliance på www.dell.com/regulatory_compliance.
2 Løft og vend sidechassiset væk fra computeren. 3 Find CMOS-jumperen på systemkortet. BEMÆRK: For flere oplysninger om placering af jumperen, se Systemkortkomponenter. 4 94 Fjern jumperstikket fra adgangskode-jumperbenene (PSWD) og placer det på CMOS-jumperbenene.
5 Vent 5 sekunder, og genplacer jumperstikket til dets oprindelige placering. 6 Drej sidechassiset mod computeren, til det klikker på plads. Efterfølgende forudsætninger 1 Genmonter frontfacetten. 2 Genmonter computerdækslet.
Sådan opdateres BIOS'en Du skal muligvis opdatere BIOS, når der er en opdatering tilgængelig, eller når du genmonterer systemkortet. Følg disse trin for at opdatere BIOS: 1 Tænd computeren. 2 Gå til www.dell.com/support. 3 Klik på Product Support (Produktsupport), indtast din computers servicemærke og klik på Submit (Send). BEMÆRK: Hvis du ikke har servicemærket, brug autodetekteringsfunktionen eller gennemse din computermodel manuelt.
Rekvirere hjælp og kontakte Dell Selv-hjælpsressourcer Du kan få oplysninger og hjælp til Dell-produkter og servicer ved at bruge disse selvhjælpsressourcer: Tabel 12. Selv-hjælpsressourcer Selv-hjælpsressourcer Ressourcelokalisering Information om Dells produkter og services www.dell.com Min Dell Tips Kontakt support Skriv i Windows-søgning Contact Support (Hjælp og Support), og tryk på Enter. Online-hjælp til operativsystem www.dell.com/support/windows www.dell.
Selv-hjælpsressourcer Ressourcelokalisering Få følgende oplysninger om dit produkt: Se Me and My Dell (Mig og mit Dell) på www.dell.com/support/manuals. • • • • • • • Produktspecifikationer Operativsystem Installation og brug af produktet Sikkerhedskopiering af data Fejlfinding og diagnosticering Systemgendannelse BIOS-oplysninger Find dit produkt ved at bruge en af følgende muligheder på Me and My Dell (Mig og mit Dell): • • • Vælg Detect Product (Registrer produkt).