Inspiron 5493 Servisni priručnik Regulativni model: P120G Regulativna vrsta: P120G002
Napomene, oprezi i upozorenja NAPOMENA NAPOMENA ukazuje na važne informacije koje vam pomažu da koristite svoj proizvod na bolji način. OPREZ OPREZ naznačuje moguće oštećenje hardvera ili gubitak podataka i objašnjava kako izbjeći neki problem. UPOZORENJE UPOZORENJE naznačuje moguće oštećenje imovine, osobne ozljede ili smrt. © 2019. Dell Inc. ili njegove podružnice. Sva prava pridržana. Dell, EMC i drugi zaštitni znakovi vlasništvo su tvrtke Dell Inc. ili njezinih podružnica.
Sadržaj 1 Rad na unutrašnjosti računala........................................................................................................ 5 Sigurnosne upute...................................................................................................................................................................5 Prije radova na unutrašnjosti računala................................................................................................................................
Upravljački programi za bežičnu vezu i Bluetooth...........................................................................................................69 4 Program za postavljanje sustava.................................................................................................. 70 Program za postavljanje sustava....................................................................................................................................... 70 Ulaz u program za postavljanje BIOS-a............
1 Rad na unutrašnjosti računala Sigurnosne upute Sljedećih uputa pridržavajte se radi zaštite računala od moguće g oštećenja i radi osiguranja osobne zaštite. Osim ako je drugačije navedeno, svaki postupak naveden u ovom dokumentu pretpostavlja da ste pročitali sigurnosne upute koje ste dobili zajedno s računalom. NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom. Za dodatne sigurnosne informacije pogledate sukladnost sa zakonskim odredbama na www.dell.
Zaštita od statičkog elektriciteta — ESD Statički elektricitet glavni je problem prilikom rukovanja elektroničkim komponentama, osobito osjetljivima kao što su kartice proširenja, procesori, memorijski DIMM-ovi i matične ploče. Vrlo slabi izboji mogu oštetiti strujne krugove na načine koji možda neće biti očiti, kao što su povremeni problemi u radu ili kraći vijek trajanja. Uza sve veće zahtjeve za niskom potrošnjom energije i većom gustoćom komponenti, zaštita od statičkog elektriciteta sve je važnija.
• • sustav na kojem radite. Također, na radnome mjestu ne smije biti izolacijskih materijala koji mogu uzrokovati elektrostatički izboj. Izolatore kao što su stiropor i plastika treba odmaknuti 30 cm od osjetljivih dijelova prije dodirivanja bilo kojih dijelova hardvera Antistatička ambalaža – svi uređaji osjetljivi na elektrostatički izboj moraju se slati i primati u antistatičkoj ambalaži. Najbolja je ambalaža od metala i vrećice zaštićene od statičkog elektriciteta.
2 Uklanjanje i instaliranje komponenti Preporučeni alati Za izvršavanje postupaka iz ovog dokumenta možda će vam trebati slijedeći alati: • • • Križni odvijač #1 Odvijač s ravnom glavom Plastično šilo Popis vijaka NAPOMENA Kad uklanjate vijke iz komponente, preporučuje se da zabilježite vrstu i količinu vijaka te da ih stavite u kutiju za pohranu vijaka. Time se osigurava vraćanje točnog broja i vrste vijaka prilikom zamjene komponente. NAPOMENA Neka računala imaju magnetske površine.
Komponenta osigurano Vrsta vijka Količina SSD pogon Matična ploča M2x3 1 Matična ploča Sklop oslonca za dlanove i tipkovnice M2x4 1 Podloga osjetljiva na dodir Sklop oslonca za dlanove i tipkovnice M1,6x2 2 Podloga osjetljiva na dodir (potporni nosači) Sklop oslonca za dlanove i tipkovnice M1,6x2 3 Nosač kartice za bežičnu vezu I/O ploču M2x3 1 Slika vijka Rastavljanje i ponovno sastavljanje Poklopac kućišta Uklanjanje poklopca kućišta NAPOMENA Prije rada na unutrašnjosti računala p
3. Izdignite poklopac kućišta počevši od gornjeg desnog kuta sklopa oslonca za dlanove i tipkovnice. 4. Podignite poklopac kućišta sa sklopa oslonca za dlanove i tipkovnice počevši od desne strane poklopca kućišta.
NAPOMENA Sljedeći koraci primjenjivi su samo ako želite ukloniti još neke komponente iz računala. 5. Ogulite traku koja pričvršćuje kabel baterije za matičnu ploču. 6. Odspojite kabel baterije iz matične ploče. 7. Pritisnite i 5 sekundi držite gumb za uključivanje/isključivanje kako biste uzemljili računalo i ispraznili zaostali elektricitet.
3. Poravnajte i postavite poklopac kućišta na sklop oslonca za dlanove i tipkovnice. 4. Pogurnite poklopac kućišta na mjesto. 5. Ponovno postavite sedam vijaka (M2,5x5) koji pričvršćuju poklopac kućišta na sklop oslonca za dlanove i tipkovnice.
6. Zategnite dva pričvrsna vijka koji pričvršćuju poklopac kućišta na sklop oslonca za dlanove i tipkovnice. Baterija Uklanjanje baterije NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala. Za dodatne sigurnosne informacije pogledate sukladnost sa zakonskim odredbama na www.dell.
• Ako se baterija zaglavi u računalu zbog nabreknuća, nemojte je pokušavati osloboditi jer probijanje, savijanje ili drobljenje litij-ionske baterije može biti opasno. U takvom slučaju za pomoć se obratite tehničkoj podršci tvrtke Dell. Idite na www.dell.com/contactdell. • Uvijek kupujte originalne baterije s web mjesta www.dell.com ili ovlaštenih Dellovih partnera i prodavača. Predradnje Uklonite poklopac kućišta. Postupak 1. Ogulite traku koja pričvršćuje kabel baterije za matičnu ploču. 2.
Koraci nakon postupka Ponovno postavite poklopac kućišta. Memorijski moduli Uklanjanje memorijskih modula NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala. Za dodatne sigurnosne informacije pogledate sukladnost sa zakonskim odredbama na www.dell.com/regulatory_compliance.
2. Vrhovima prstiju pažljivo raširite sigurnosne spajalice za pričvršćivanje na svakom kraju utora memorijskog modula sve dok memorijski modul ne iskoči. 3. Uklonite memorijski modul iz utora memorijskog modula. Ponovno postavljanje memorijskih modula NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala.
Koraci nakon postupka Ponovno postavite poklopac kućišta. Kartica za bežičnu vezu Uklanjanje kartice za bežičnu vezu NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala. Za dodatne sigurnosne informacije pogledate sukladnost sa zakonskim odredbama na www.dell.com/regulatory_compliance.
2. Uklonite vijak (M2x3) koji pričvršćuje nosač kartice za bežičnu vezu na matičnu ploču. 3. Povucite i uklonite nosač kartice za bežičnu vezu s kartice. 4. Isključite antenske kabele iz karticu za bežičnu vezu. 5. Izvucite i podignite karticu za bežičnu vezu iz utora kartice za bežičnu vezu.
Ponovno postavljanje kartice za bežičnu vezu NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala. Za dodatne sigurnosne informacije pogledate sukladnost sa zakonskim odredbama na www.dell.com/regulatory_compliance.
Koraci nakon postupka Ponovno postavite poklopac kućišta. Baterija na matičnoj ploči Uklanjanje baterije na matičnoj ploči NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala. Za dodatne sigurnosne informacije pogledate sukladnost sa zakonskim odredbama na www.dell.
Ponovno postavljanje baterije na matičnoj ploči NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala. Za dodatne sigurnosne informacije pogledate sukladnost sa zakonskim odredbama na www.dell.com/regulatory_compliance.
Koraci nakon postupka Ponovno postavite poklopac kućišta. Ventilator Uklanjanje ventilatora NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala. Za dodatne sigurnosne informacije pogledate sukladnost sa zakonskim odredbama na www.dell.com/regulatory_compliance.
Ponovno postavljanje ventilatora NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala. Za dodatne sigurnosne informacije pogledate sukladnost sa zakonskim odredbama na www.dell.com/regulatory_compliance. Postupak 1.
Koraci nakon postupka Ponovno postavite poklopac kućišta. Sklop hladila procesora Uklanjanje sklopa hladila NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala. Za dodatne sigurnosne informacije pogledate sukladnost sa zakonskim odredbama na www.dell.com/regulatory_compliance.
Ponovno postavljanje sklopa hladila NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala. Za dodatne sigurnosne informacije pogledate sukladnost sa zakonskim odredbama na www.dell.com/regulatory_compliance. OPREZ Netočno poravnanje sklopa hladila može oštetiti matičnu ploču i procesor.
Koraci nakon postupka Ponovno postavite poklopac kućišta. SSD pogon/Intel Optane memorijski modul Uklanjanje SSD pogona/Intel Optane memorije Trebate onemogućiti Intel Optane uređaj prije nego što ga izvadite iz računala. Za više informacija o onemogućavanju Intel Optane uređaja pogledajte Onemogućavanje Intel Optane memorije. NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala.
5. Preokrenite štitnik SSD pogona. 6. Uklonite vijak (M2x2) kojim je SSD pogon pričvršćen na štitnik SSD pogona. 7. Podignite SSD pogon sa štitnika SSD pogona. Postupak uklanjanja M.2 2280 SSD pogona 1. Otpustite pričvrsni vijak koji pričvršćuje štitnik SSD pogona / Intel Optane memorije i SSD pogon / Intel Optane memoriju na sklop oslonca za dlanove i tipkovnice. 2. Uklonite (M2x3) vijak koji pričvršćuje štitnik SSD pogona / Intel Optane memorije na sklop oslonca za dlanove i tipkovnice.
4. Izvucite i uklonite SSD pogon / Intel Optane memoriju iz utora za SSD pogon / Intel Optane memoriju. Ponovno postavljanje SSD pogona/Intel Optane memorije Omogućite Intel Optane uređaj nakon što ga vratite. Za više informacija o omogućavanju uređaja Intel Optane pogledajte Omogućavanje memorije Intel Optane. NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala.
3. Poravnajte urez na SSD pogonu s jezičkom na utoru SSD pogona. 4. Umetnite SSD pogon u njegov utor. 5. Umetnite jezičak štitnika SSD pogona u utor na sklopu oslonca za dlanove i tipkovnice. 6. Pritegnite pričvrsni vijak koji pričvršćuje štitnik SSD pogona i SSD pogon na sklop oslonca za dlanove i tipkovnice. 7. Ponovno postavite (M2x3) vijak koji pričvršćuje modul SSD pogona na sklop oslonca za dlanove i tipkovnice. Postupak ponovnog postavljanja M.2 2280 SSD pogona 1.
4. Ponovno postavite vijak (M2x3) koji pričvršćuje SSD pogon / Intel Optane memoriju na sklop oslonca za dlanove i tipkovnice. 5. Pritegnite pričvrsni vijak koji pričvršćuje štitnik SSD pogon / Intel Optane memorije i SSD pogon / Intel Optane memoriju na sklop oslonca za dlanove i tipkovnice. NAPOMENA Štitnik SSD pogona / Intel Optane memorije dostupan je samo na računalima isporučenim s PCIe ili NVMe SSD pogonom / Intel Optane memorijom. Koraci nakon postupka Ponovno postavite poklopac kućišta.
4. Odspojite umetak iz sklopa tvrdog pogona. 5. Uklonite četiri vijka (M3x3) koji pričvršćuju nosač tvrdog pogona na tvrdom pogonu. 6. Podignite nosač tvrdog pogona s tvrdog pogona.
Ponovno postavljanje tvrdog pogona Omogućite Intel Optane nakon što vratite pohranu za SATA. Za više informacija o omogućavanju Intel Optanea pogledajte Omogućavanje Intel Optanea. NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala.
4. Poravnajte otvore za vijke na sklopu tvrdog pogona s otvorima za vijke na sklopu oslonca za dlanove i tipkovnice. 5. Ponovno postavite dva vijka (M2x3) koji pričvršćuju sklop tvrdog pogona na sklop oslonca za dlanove i tipkovnice. 6. Priključite kabel tvrdog pogona na matičnu ploču i zatvorite zasun kako biste osigurali kabel. Koraci nakon postupka 1. Ponovno postavite bateriju. 2. Ponovno postavite poklopac kućišta.
Predradnje 1. Uklonite poklopac kućišta. 2. Uklonite bateriju. Postupak 1. Otvorite zasun i odspojite kabel podloge osjetljive na dodir iz matične ploče. 2. Uklonite tri vijka (M1,6x2) koji pričvršćuju podlogu osjetljivu na dodir na sklop oslonca za dlanove i tipkovnice. 3. Podignite nosač podloge osjetljive na dodir sa sklopa oslonca za dlanove i tipkovnice. 4. Uklonite dva vijka (M1,6x2) koji pričvršćuju podlogu osjetljivu na dodir na sklop oslonca za dlanove i tipkovnice. 5.
Ponovno postavljanje podloge osjetljive na dodir NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala. Za dodatne sigurnosne informacije pogledate sukladnost sa zakonskim odredbama na www.dell.com/regulatory_compliance.
4. Ponovno postavite tri vijka (M1,6x2) koji pričvršćuju podlogu osjetljivu na dodir na sklop oslonca za dlanove i tipkovnice. 5. Umetnite kabel podloge osjetljive na dodir u priključak na matičnoj ploči i zatvorite zasun kako biste pričvrstili kabel. Koraci nakon postupka 1. Ponovno postavite bateriju. 2. Ponovno postavite poklopac kućišta.
Ponovno postavljanje zvučnika NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala. Za dodatne sigurnosne informacije pogledate sukladnost sa zakonskim odredbama na www.dell.com/regulatory_compliance.
Koraci nakon postupka 1. Ponovo postavite SSD pogon/Intel Optane memoriju. 2. Ponovno postavite masku kućišta. I/O ploču Uklanjanje I/O ploče NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala. Za dodatne sigurnosne informacije pogledate sukladnost sa zakonskim odredbama na www.dell.
Ponovno postavljanje I/O ploče NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala. Za dodatne sigurnosne informacije pogledate sukladnost sa zakonskim odredbama na www.dell.com/regulatory_compliance. Postupak 1.
Koraci nakon postupka 1. Ponovno postavite zvučnike. 2. Ponovno postavite SSD pogon/Intel Optane. 3. Ponovno postavite masku kućišta. Sklop zaslona Uklanjanje sklopa zaslona NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala.
3. Uklonite četiri vijka (M2,5x4) koji pričvršćuju lijevu i desnu šarku na matičnu ploču i sklop oslonca za dlanove i tipkovnice. 4. Pod kutom odignite sklop oslonca za dlanove i tipkovnice. 5. Izvucite i podignite sklop oslonca za dlanove i tipkovnice sa sklopa zaslona.
6. Nakon izvođenja svih gore navedenih koraka preostaje sklop zaslona.
Ponovno postavljanje sklopa zaslona NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala. Za dodatne sigurnosne informacije pogledate sukladnost sa zakonskim odredbama na www.dell.com/regulatory_compliance.
4. Provucite kabel zaslona kroz vodilice na ventilatoru i sklopu oslonca za dlanove i tipkovnice. 5. Priključite kabel zaslona na matičnu ploču.
Koraci nakon postupka 1. Ponovno postavite ventilator. 2. Ponovno postavite karticu za bežičnu vezu. 3. Ponovno postavite masku kućišta. Ploča s gumbom za uključivanje/isključivanje Uklanjanje ploče gumba za uključivanje/isključivanje NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala.
Postupak 1. Uklonite vijak (M2x2) koji pričvršćuje gumb za uključivanje/isključivanje na sklop oslonca za dlanove i tipkovnice. 2. Podignite gumb za uključivanje/isključivanje sa sklopa oslonca za dlanove i tipkovnice. Ponovno postavljanje ploče s gumbom za uključivanje/isključivanje NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala.
Koraci nakon postupka 1. Ponovno postavite sklop zaslona. 2. Ponovno postavite tvrdi pogon. 3. Ponovno postavite ventilator. 4. Ponovno postavite karticu za bežičnu vezu. 5. Ponovno postavite bateriju. 6. Ponovno postavite masku kućišta. Matična ploča Uklanjanje matične ploče NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala.
3. Uklonite memorijske module. 4. Uklonite karticu za bežičnu vezu. 5. Uklonite ventilator. 6. Uklonite hladilo. 7. Uklonite SSD pogon/Intel Optane memoriju. Postupak 1. Uklonite dva (M2,5x5) vijka koji pričvršćuju lijevu šarku zaslona na sklop oslonca za dlanove i tipkovnice. 2. Maksimalno podignite lijevu šarku zaslona. 3. Iskopčajte kabel zvučnika iz matične ploče. 4. Otvorite zasun i odspojite tipkovnicu iz matične ploče. 5.
Ponovno postavljanje matične ploče NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala. Za dodatne sigurnosne informacije pogledate sukladnost sa zakonskim odredbama na www.dell.com/regulatory_compliance. NAPOMENA Servisna oznaka vašeg računala pohranjena je na matičnoj ploči.
3. Pritisnite lijevu šarku zaslona na matičnu ploču. 4. Ponovno postavite dva (M2,5x5) vijka koji pričvršćuju lijevu šarku zaslona na matičnu ploču. 5. Spojite kabel priključka adaptera za napajanje i kabel zvučnika na matičnu ploču. 6. Umetnite kabel ploče s gumbom za uključivanje/isključivanje u priključak na matičnoj ploči i zatvorite zasun kako biste pričvrstili kabel. 7. Umetnite kabel čitača otisaka prstiju u priključak na matičnoj ploči i zatvorite zasun kako biste pričvrstili kabel.
Koraci nakon postupka 1. Ponovo postavite SSD pogon/Intel Optane memoriju. 2. Ponovno postavite sklop hladila. 3. Ponovno postavite ventilator. 4. Ponovno postavite karticu za bežičnu vezu. 5. Ponovno postavite memorijske module. 6. Ponovno postavite bateriju. 7. Ponovno postavite masku kućišta. Unošenje servisne oznake u BIOS program za postavljanje sustava 1. Uključite ili ponovno pokrenite računalo. 2. Pritisnite F2 kada se prikaže logotip Dell za ulaz u BIOS u program za postavljanje. 3.
Gumb za uključivanje/isključivanje s čitačem otisaka prstiju Uklanjanje gumba za uključivanje/isključivanje pomoću čitača otiska prsta NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala. Za dodatne sigurnosne informacije pogledate sukladnost sa zakonskim odredbama na www.dell.
Ponovno postavljanje gumba za uključivanje/isključivanje s čitačem otiska prsta NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala. Za dodatne sigurnosne informacije pogledate sukladnost sa zakonskim odredbama na www.dell.com/regulatory_compliance.
Koraci nakon postupka 1. Ponovno postavite matičnu ploču. 2. Ponovno postavite sklop zaslona. 3. Ponovno postavite tvrdi pogon. 4. Ponovno postavite SSD pogon/Intel Optane. 5. Ponovno postavite sklop hladila. NAPOMENA Matična ploča može se ukloniti i ugraditi i kada je hladilo još priključeno. 6. Ponovno postavite ventilator. 7. Ponovno postavite karticu za bežičnu vezu. 8. Ponovno postavite memorijske module. 9. Ponovno postavite bateriju. 10. Ponovno postavite masku kućišta.
5. Uklonite sklop zaslona. 6. Uklonite matičnu ploču. Postupak 1. Uklonite vijak (M2x3) koji pričvršćuje priključak za adapter za napajanje na sklop oslonca za dlanove i tipkovnice. 2. Podignite priključak adaptera za napajanje zajedno s njegovim kabelom sa sklopa oslonca za dlanove i tipkovnice.
Koraci nakon postupka 1. Ponovno postavite matičnu ploču. 2. Ponovno postavite sklop zaslona. 3. Ponovno postavite karticu za bežičnu vezu. 4. Ponovno postavite memorijske module. 5. Ponovno postavite bateriju. 6. Ponovno postavite masku kućišta. Sklop oslonca za ruku i tipkovnica Uklanjanje sklopa oslonca za ruku i tipkovnice NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala.
7. Uklonite SSD pogon/Intel Optane memoriju. 8. Uklonite tvrdi pogon. 9. Uklonite podlogu osjetljivu na dodir. 10. Uklonite zvučnike. 11. Uklonite I/O ploču. 12. Uklonite sklop zaslona. 13. Uklonite ploču s gumbom za uključivanje (opcija). 14. Uklonite matičnu ploču. 15. Uklonite gumb za uključivanje/isključivanje s čitačem otisaka prstiju (izborno). 16. Uklonite priključak adaptera za napajanje. Postupak Nakon izvođenja gore navedenih koraka preostaje sklop oslonca za dlanove i tipkovnice.
Koraci nakon postupka 1. Ponovno postavite priključak adaptera za napajanje. 2. Ponovno postavite gumb za uključivanje/isključivanje s čitačem otisaka prstiju (izborno). 3. Ponovno postavite matičnu ploču. 4. Ponovno postavite ploču gumba za uključivanje/isključivanje (izborno). 5. Ponovno postavite sklop zaslona. 6. Ponovno postavite I/O ploču. 7. Ponovno postavite zvučnike. 8. Ponovno postavite podlogu osjetljivu na dodir. 9. Ponovno postavite tvrdi pogon. 10. Ponovno postavite SSD pogon/Intel Optane. 11.
Predradnje 1. Uklonite poklopac kućišta. 2. Uklonite karticu za bežičnu vezu. 3. Uklonite ventilator. 4. Uklonite sklop zaslona. Postupak 1. Izdignite poklopce šarki zaslona na snu sklopa zaslona. 2. Izdignite okvir zaslona kako biste ga oslobodili sa sklopa stražnjeg pokrova zaslona i antene. 3. Podignite okvir zaslona sa sklopa stražnjeg poklopca zaslona i antene.
Koraci nakon postupka 1. Ponovno postavite sklop zaslona. 2. Ponovno postavite ventilator. 3. Ponovno postavite karticu za bežičnu vezu. 4. Ponovno postavite masku kućišta. Kamera Uklanjanje kamere NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala.
Postupak 1. Priključite kabel kamere na modul kamere. 2. Koristeći vodilice za poravnanje zalijepite modul kamere na sklop stražnjeg poklopca zaslona i antene. Koraci nakon postupka 1. Ponovno postavite okvir zaslona. 2. Ponovno postavite sklop zaslona. 3. Ponovno postavite karticu za bežičnu vezu. 4. Ponovno postavite masku kućišta.
3. Odlijepite traku koja pričvršćuje kabel zaslona na stražnju stranu ploče zaslona. 4. Otvorite zasun i izvucite kabel zaslona iz kabela ploče zaslona. NAPOMENA Nemojte povlačiti i skidati rastezljive (SR) trake s ploče zaslona. Nema potrebe za razdvajanjem nosača s ploče zaslona. 5. Podignite ploču zaslona sa sklopa stražnjeg poklopca zaslona i antene.
4. Preokrenite ploču zaslona i poravnajte otvore za vijke na ploči zaslona s otvorima za vijke na stražnjem poklopcu zaslona i antene. 5. Ponovno postavite dva vijka (M2x2) i dva vijka (M2,5x2,5)kojima je ploča zaslona pričvršćena na sklop stražnjeg poklopca zaslona i antene. Koraci nakon postupka 1. Ponovno postavite okvir zaslona. 2. Ponovno postavite sklop zaslona. 3. Ponovno postavite ventilator. 4. Ponovno postavite karticu za bežičnu vezu. 5. Ponovno postavite masku kućišta.
unutrašnjosti vašeg računala. Za dodatne sigurnosne informacije pogledate sukladnost sa zakonskim odredbama na www.dell.com/regulatory_compliance. Predradnje 1. Uklonite poklopac kućišta. 2. Uklonite karticu za bežičnu vezu. 3. Uklonite sklop zaslona. 4. Uklonite okvir zaslona. Postupak 1. Odlijepite traku koja pričvršćuje kabel zaslona na ploču zaslona. 2. Zabilježite kako su provedeni kabel zaslona i antenski kabel, a zatim uklonite kabele iz šarki zaslona. 3.
Koraci nakon postupka 1. Ponovno postavite okvir zaslona. 2. Ponovno postavite sklop zaslona. 3. Ponovno postavite karticu za bežičnu vezu. 4. Ponovno postavite masku kućišta. Kabel zaslona Uklanjanje kabela zaslona NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala.
Ponovno postavljanje kabela zaslona NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala. Nakon rada na unutrašnjosti vašeg računala, slijedite upute u Nakon rada na unutrašnjosti vašeg računala. Za dodatne sigurnosne informacije pogledate sukladnost sa zakonskim odredbama na www.dell.com/regulatory_compliance. Postupak 1.
5. Uklonite okvir zaslona. 6. Uklonite kameru. 7. Uklonite ploču zaslona. 8. Uklonite šarke zaslona. 9. Uklonite kabel zaslona. Postupak Nakon izvođenja gore navedenih koraka preostaje sklop stražnjeg poklopca zaslona i antene. Ponovno postavljanje stražnjeg poklopca zaslona i sklopa antene NAPOMENA Prije rada na unutrašnjosti računala pročitajte sigurnosne upute koje ste dobili s računalom i slijedite korake u Prije rada na unutrašnjosti vašeg računala.
Koraci nakon postupka 1. Ponovno postavite kabel zaslona. 2. Ponovno postavite šarke zaslona. 3. Ponovno postavite ploču zaslona. 4. Ponovno postavite kameru. 5. Ponovno postavite okvir zaslona. 6. Ponovno postavite sklop zaslona. 7. Ponovno postavite ventilator. 8. Ponovno postavite karticu za bežičnu vezu. 9. Ponovno postavite masku kućišta.
3 Upravljački programi uređaja Uslužni softver za instalaciju Intel seta čipova U Upravitelju uređajem provjerite jesu li instalirani upravljački programi za set čipšova. Instaliraj ažuriranja upravljačkog programa za Intel set čipova iz www.dell.com/support. Upravljački programi za video U Upravitelju uređajem provjerite jesu li instalirani upravljački programi za video. Instaliraj ažuriranje upravljačkog programa za video s www.dell.com/support.
4 Program za postavljanje sustava NAPOMENA Prikaz stavki navedenih u ovom odjeljku ovisi o računalu i instaliranim uređajima. Program za postavljanje sustava OPREZ Ako niste stručni korisnik računala, ne mijenjate postavke u programu za postavljanje BIOS-a. Neke izmjene mogle bi uzrokovati nepravilan rad računala. NAPOMENA Prije promjene programa za postavljanje BIOS-a, preporučuje se da zapišete podatke sa zaslona programa za postavljanje BIOS-a za buduću uporabu.
• otvoriti izbornik za jednokratno podizanje sustava pritiskom tipke F12 Izbornik za jednokratno podizanje sustava prikazuje uređaje s kojih možete podignuti sustav uključujući opciju dijagnostike. Opcije izbornika za podizanje su: • • uklonjivi pogon (ako postoji) STXXXX Drive (STXXXX tvrdi pogon) (ako postoji) NAPOMENA XXX označava broj SATA pogona. • • • Optički pogon (ako postoji) SATA tvrdi pogon (ako postoji) Dijagnostike NAPOMENA Odabir dijagnostika prikazuje zaslon ePSA dijagnostike.
General (Općenito) – System Information (Podaci o sustavu) Processor L3 Cache Prikazuje veličinu L3 predmemorije procesora. Podržava HT Prikazuje je li procesor kompatibilan s tehnologijom HyperThreading (HT). 64–bit Technology Prikazuje koristi li se 64-bitna tehnologija. Device Information (Podaci o uređaju) SATA-0 Prikazuje podatke o M.2 SATA SSD-0 uređaju računala. SATA-1 Prikazuje podatke o M.2 SATA SSD-1 uređaju računala. M.2 PCIe SSD-0 Prikazuje podatke o M.2 PCIe SSD-0 uređaju računala.
System Configuration (Konfiguracija sustava) Enable Boot Support (Omogući podršku podizanja sustava) Omogućuje/onemogućuje pokretanje s USB uređaja za masovnu pohranu kao što je vanjski tvrdi pogon, optički pogon i USB pogon. Enable External USB Port Omogućuje/onemogućuje pokretanje s USB uređaja za masovnu pohranu spojenog na vanjski USB priključak. Audio Omogućuje/onemogućuje ugrađeni audiokontroler. Keyboard Illumination Omogućuje odabir načina rada značajke osvjetljenja tipkovnice.
Tablica 7. Opcije postavljanja sustava – izbornik Secure Boot (Sigurno pokretanje sustava) Secure Boot (Sigurno pokretanje sustava) Secure Boot Enable (Omogući sigurno podizanje sustava) Omogućuje/onemogućuje funkciju sigurnog pokretanja sustava. Secure Boot Mode Mijenja ponašanje Sigurnog pokretanja tako da omogućuje procjena ili provedbu potpisa UEFI upravljačkih programa.
Intel Software Guard Extensions Advanced Battery Charge Configuration Koristi se za omogućavanje Advanced Battery Charge Configuration (Napredno konfiguriranje napunjenosti baterije) od početka dana do određenog radnog razdoblja. Primary Battery Charge Configuration Koristi se za odabir postavki napunjenosti primarne baterije tako da se uređaj pokreće i zaustavlja ovisno o unaprijed postavljenoj razini napunjenosti. Zadana postavka: Adaptive (Prilagodljivo).
System Logs (Dnevnici sustava) Power Events Prikazuje događaje vezane uz napajanje. Tablica 13. Opcije za postavljanje sustava — izbornik SupportAssist System Resolution (Razlučivost sustava SupportAssist) SupportAssist System Resolution (Razlučivost sustava SupportAssist) Auto OS Recovery Threshold Služi za upravljanje tokom automatskog pokretanja sustava za konzolu za upravljanje razlučivosti sustava SupportAssist i alata Dell OS Recovery za vraćanje operativnog sustava tvrtke Dell.
5 Rješavanje problema Dijagnostika poboljšanog testiranja računala prije podizanja sustava (ePSA) ePSA dijagnostika (poznata i kao dijagnostika sustava) izvršava cjelovitu provjeru hardvera. ePSA dijagnostika ugrađena je u BIOS i BIOS je interno pokreće.
Off (Isključeno) • • • Adapter napajanja je priključen i baterija je ptopuno napunjena. Računalo radi na bateriji i baterija ima više od 5 posto napunjenosti. Računalo je u stanju mirovanja, hibernacije ili je isključeno NAPOMENA Svjetlo aktivnosti tvrdog pogona podržano je samo na računalima isporučenim s tvrdim pogonom. Svjetla napajanja i statusa baterije trepere žuto zajedno sa šiframa zvučnih signala označavaju kvarove.
Ažuriranje BIOS-a Flash postupkom Možda ćete trebati ažurirati BIOS kad ažuriranje bude dostupno ili nakon zamjene matične ploče. Slijedite ove upute za ažuriranje BIOS-a flash postupkom: 1. Uključite računalo. 2. Idite na www.dell.com/support. 3. Kliknite Product support (Podrška proizvodu), upišite servisnu oznaku računala i kliknite Send (Pošalji). NAPOMENA Ako nemate servisnu oznaku, koristite funkciju automatskog otkrivanja ili ručno pretražite za svoj model računala. 4.
Ažuriranje BIOS-a flashanjem (USB ključ) 1. Slijedite postupak od 1. do 7. koraka u odlomku „Ažuriranje BIOS-a flashiranjem” kako biste preuzeli najnoviji program za postavljanje BIOS-a. 2. Stvorite USB pogon za podizanje sustava. Za više pojedinosti pogledajte članak baze znanja pod oznakom SLN143196 na adresi www.dell.com/support. 3. Kopirajte program za postavljanje BIOS-a na USB pogon za podizanje sustava. 4. Priključite USB pogon za podizanje sustava na računalo kojem je potrebno ažuriranje BIOS-a. 5.
6 Dobivanje pomoći i kontaktiranje tvrtke Dell Izvori za samopomoć Informacije i pomoć o Dell proizvodima i uslugama korištenjem ovih mrežnih izvora za samopomoć: Tablica 15. Izvori za samopomoć Izvori za samopomoć Lokacija resursa Informacije o Dell proizvodima i uslugama www.dell.com My Dell Savjeti Kontaktirajte podršku U Windows tražilici upišite Contact Support, pa pritisnite Enter. Pomoć na mreži za operacijski sustav www.dell.com/support/windows www.dell.