Inspiron 5493 Priročnik za servisiranje Regulativni model: P120G Regulativni tip: P120G002
Opombe, svarila in opozorila OPOMBA OPOMBA označuje pomembne informacije, ki vam pomagajo bolje izkoristiti računalnik. POZOR SVARILO oznacuje monost pokodb strojne opreme ali izgube podatkov in svetuje, kako se izogniti teavi. Opozorilo OPOZORILO označuje možnost poškodb lastnine, osebnih poškodb ali smrti. © 2019 <2/ Dell Inc. ali njegove podružnice Vse pravice pridržane. Dell, EMC in druge blagovne znamke so blagovne znamke družbe Dell Inc. ali njenih hčerinskih družb.
Kazalo 1 Delo v notranjosti računalnika........................................................................................................ 5 Varnostna navodila................................................................................................................................................................ 5 Preden začnete delo v notranjosti računalnika.................................................................................................................. 5 Preden začnete.........
Gonilniki za brezžično kartico in Bluetooth...................................................................................................................... 68 4 Sistemske nastavitve..................................................................................................................69 Nastavitev sistema..............................................................................................................................................................
1 Delo v notranjosti računalnika Varnostna navodila Uporabite naslednja varnostna navodila, da zaščitite računalnik pred morebitnimi poškodbami in zagotovite lastno varnost. Če ni označeno drugače, je v postopkih v tem dokumentu predpostavljeno, da ste prebrali varnostne informacije, ki ste jih dobili z računalnikom: OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostna navodila, ki so priložena računalniku.
Zaščita pred elektrostatično razelektritvijo (ESD) Elektrostatična razelektritev predstavlja veliko težavo pri ravnanju z elektronskimi komponentami, še posebej to velja za občutljive dele, kot so na primer razširitvene kartice, procesorji, pomnilniški moduli in sistemske plošče. Že zelo majhna količina naboja lahko poškoduje vezja na način, ki ga je težko odkriti, na primer z občasnim pojavljanjem napak ali krajšo življenjsko dobo.
• • omarah znotraj podatkovnih središč, namizni in prenosni računalniki pa so večinoma postavljeni na pisarniških mizah. Pred delom vedno poiščite primeren odprt in urejen prostor, ki je dovolj velik za uporabo kompleta ESD za teren, hkrati pa mora ostati dovolj prostora za opremo, ki jo želite servisirati. V delovnem prostoru ne sme biti izolatorjev, ki lahko povzročijo razelektritev.
2 Odstranjevanje in namestitev komponent Priporočena orodja Za postopke, navedene v tem dokumentu, boste potrebovali naslednja orodja: • • • Križni izvijač št. 1 Ploščati izvijač Plastično pero Seznam vijakov OPOMBA Pri odstranjevanju vijakov iz komponente priporočamo, da si zapišete vrsto vijaka in število vijakov ter jih nato odložite v škatlo za shranjevanje vijakov. Tako boste ob vnovični namestitvi komponente zagotovo uporabili pravo število in ustrezno vrsto vijakov.
Komponenta Pričvrščena na Vrsta vijaka Količina Gumb za vklop Sklop naslona za dlani in tipkovnice M2x2 1 SSD pogon Matična plošča M2x3 1 Matična plošča Sklop naslona za dlani in tipkovnice M2x4 1 Sledilna ploščica Sklop naslona za dlani in tipkovnice M1.6x2 2 Sledilna ploščica (podporni Sklop naslona za dlani in nosilci) tipkovnice M1.
3. Pokrov osnovne plošče privzdignite tako, da začnete v zgornjem desnem kotu sklopa naslona za dlani in tipkovnice. 4. Z desne strani pokrova osnovne plošče dvignite pokrov osnovne plošče s sklopa naslona za dlani in tipkovnice.
OPOMBA Naslednji koraki so potrebni samo, če želite iz računalnika odstraniti še kakšne komponente. 5. Odlepite trak, s katerim je kabel baterije pritrjen na sistemsko ploščo. 6. Odklopite kabel baterije s sistemske plošče. 7. Za ozemljitev računalnika in porabo preostale energije za 5 sekund pridržite gumb za vklop.
3. Poravnajte pokrov osnovne plošče in ga postavite na sklop naslona za dlani in tipkovnico. 4. Pritisnite pokrov osnovne plošče, da se zaskoči. 5. Znova privijte sedem vijakov (M2,5x5), s katerimi je pokrov osnovne plošče pritrjen na sklop naslona za dlani in tipkovnice.
6. Privijte zaskočna vijaka, s katerima je pokrov osnovne plošče pritrjen na sklop naslona za dlani in tipkovnice. baterijo Odstranjevanje baterije OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. Ko končate delo v notranjosti računalnika, upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika.
• Če baterija nabrekne in se zatakne v računalniku, je ne poskušajte izvleči. Luknjanje, upogibanje ali stiskanje litijionske baterije je lahko nevarno. V takem primeru se za pomoč obrnite na tehnično pomoč Dell. Glejte www.dell.com/ contactdell. • Vedno kupite originalne Dellove baterije na www.dell.com ali pri pooblaščenih Dellovih partnerjih in prodajalcih. Pred postopkom Odstranite pokrov osnovne plošče. Postopek 1. Odlepite trak, s katerim je kabel zaslona pritrjen na sistemsko ploščo. 2.
Po postopku Ponovno namestite pokrov osnovne plošče. pomnilniški moduli, Odstranjevanje pomnilniških modulov OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. Ko končate delo v notranjosti računalnika, upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika.
2. S konicami prstom pazljivo razširite pritrdilni sponki na vsaki strani reže pomnilniškega modula, dokler pomnilniški modul ne izskoči. 3. Pomnilniški modul odstranite iz reže pomnilniškega modula. Ponovna namestitev pomnilniških modulov OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika.
Po postopku Ponovno namestite pokrov osnovne plošče. Brezžična kartica Odstranjevanje brezžične kartice OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. Ko končate delo v notranjosti računalnika, upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika.
2. Odstranite vijak (M2x3), s katerim je nosilec kabla zaslona pritrjen na sistemsko ploščo. 3. Nosilec brezžične kartice odstranite iz brezžične kartice. 4. Antenska kabla izključite iz brezžične kartice. 5. Potisnite in odstranite brezžično kartico iz reže za brezžično kartico.
Ponovna namestitev brezžične kartice OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. Ko končate delo v notranjosti računalnika, upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Dodatne informacije o varnem delu najdete na domači strani za skladnost s predpisi na naslovu www.dell.com/regulatory_compliance.
Po postopku Ponovno namestite pokrov osnovne plošče. Gumbasta baterija Odstranjevanje gumbne baterije OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. Ko končate delo v notranjosti računalnika, upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika.
Ponovna namestitev gumbne baterije OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. Ko končate delo v notranjosti računalnika, upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Dodatne informacije o varnem delu najdete na domači strani za skladnost s predpisi na naslovu www.dell.com/regulatory_compliance.
Po postopku Ponovno namestite pokrov osnovne plošče. Ventilator Odstranjevanje ventilatorja OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. Ko končate delo v notranjosti računalnika, upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Dodatne informacije o varnem delu najdete na domači strani za skladnost s predpisi na naslovu www.
Ponovna namestitev ventilatorja OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. Ko končate delo v notranjosti računalnika, upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Dodatne informacije o varnem delu najdete na domači strani za skladnost s predpisi na naslovu www.dell.com/regulatory_compliance. Postopek 1.
Po postopku Ponovno namestite pokrov osnovne plošče. Hladilnik Odstranjevanje hladilnika OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. Ko končate delo v notranjosti računalnika, upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Dodatne informacije o varnem delu najdete na domači strani za skladnost s predpisi na naslovu www.
Vnovična namestitev hladilnika OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. Ko končate delo v notranjosti računalnika, upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Dodatne informacije o varnem delu najdete na domači strani za skladnost s predpisi na naslovu www.dell.com/regulatory_compliance.
Po postopku Ponovno namestite pokrov osnovne plošče. Pogon SSD/Intel Optane Odstranjevanje pogona SSD/pomnilnika Intel Optane Pomnilniški modul Intel Optane morate onemogočiti, preden ga odstranite iz računalnika. Dodatne informacije o onemogočanju pomnilniškega modula Intel Optane so v poglavju Onemogočanje pomnilnika Intel Optane.
5. Obrnite zaščito pogona SSD. 6. Odstranite vijak (M2x2), s katerim je pogon SSD pritrjen na zaščito pogona SSD. 7. Pogon SSD dvignite z zaščite pogona SSD. Odstranitev pogona SSD M.2 2280 1. Odvijte zaskočni vijak, s katerim sta zaščita pogona SSD/pomnilnika Intel Optane in pogon SSD/pomnilnik Intel Optane pritrjena na sklop naslona za dlani in tipkovnice. 2. Odvijte vijak (M2x3), s katerim je zaščita pogona SSD/pomnilnika Intel Optane pritrjena na sklop naslona za dlani in tipkovnice.
4. Pogon SSD/pomnilnik Intel Optane potisnite iz reže za pogon SSD/pomnilnik Intel Optane in ga odstranite. Vnovična namestitev pogona SSD/pomnilnika Intel Optane Ko pomnilnik Intel Optane znova namestite, ga omogočite. Za več informacij o omogočanju pomnilnika Intel Optane glejte Omogočanje pomnilnika Intel Optane.
3. Poravnajte zarezo na sklopu SSD pogona z jezičkom na reži SSD pogona. 4. Pogon SSD potisnite v režo za pogon SSD. 5. Jeziček pogona SSD vstavite v režo na sklopu naslona za dlani in tipkovnice. 6. Privijte zaskočni vijak, s katerim sta zaščita pogona SSD in pogon SSD pritrjena na sklop naslona za dlani in tipkovnice. 7. Znova privijte vijak (M2x3), s katerim je zaščita pogona SSD pritrjena na sklop naslona za dlani in tipkovnice. Vnovična namestitev pogona SSD M.2 2280 1.
4. Znova privijte vijak (M2x3), s katerim je pogon SSD/pomnilnik Intel Optane pritrjen na sklop naslona za dlani in tipkovnice. 5. Privijte zaskočni vijak, s katerim sta zaščita pogona SSD/pomnilnika Intel Optane in pogon SSD/pomnilnik Intel Optane pritrjena na sklop naslona za dlani in tipkovnice. OPOMBA Zaščita pogona SSD/pomnilnika Intel Optane je na voljo samo za računalnike s pogonom SSD/pomnilnikom Intel Optane PCIe ali NVMe. Po postopku Ponovno namestite pokrov osnovne plošče.
4. Odklopite vmesnik s sklopa trdega diska. 5. Odstranite štiri vijake (M3x3), s katerimi je nosilec trdega diska pritrjen na trdi disk. 6. Nosilec trdega diska dvignite s trdega diska [2].
Ponovna namestitev trdega diska Omogočite pomnilnik Intel Optane, ko znova namestite pomnilnik SATA. Dodatne informacije o omogočanju pomnilnika Intel Optane so v poglavju Omogočanje pomnilnika Intel Optane. OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika.
4. Odprtine za vijake na sklopu trdega diska poravnajte z odprtinami za vijake na sklopu naslona za dlani in tipkovnice. 5. Znova namestite štiri vijake (M2x3), s katerimi je sklop trdega diska pritrjen na sklop naslona za dlani in tipkovnice [2]. 6. Kabel trdega diska priključite na sistemsko ploščo in zaprite zaklep za pritrditev kabla. Po postopku 1. Ponovno namestite baterijo. 2. Ponovno namestite pokrov osnovne plošče.
Pred postopkom 1. Odstranite pokrov osnovne plošče. 2. Odstranite baterijo. Postopek 1. Odprite zaklep in kabel sledilne tablice odklopite s sistemske plošče. 2. Odvijte tri vijake (M2x2), s katerimi je nosilec sledilne tablice pritrjen na sklop naslona za dlani in tipkovnico. 3. Nosilec sledilne tablice dvignite s sklopa naslona za dlani in tipkovnice. 4. Odstranite štiri vijake (M2x2), s katerimi je sledilna tablica pritrjena na sklop naslona za dlani in tipkovnice [1]. 5.
Vnovična namestitev sledilne ploščice OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. Ko končate delo v notranjosti računalnika, upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Dodatne informacije o varnem delu najdete na domači strani za skladnost s predpisi na naslovu www.dell.com/regulatory_compliance.
4. Privijte tri vijake (M2x2), s katerimi je nosilec sledilne tablice pritrjen na sklop naslona za dlani in tipkovnico. 5. Kabel sledilne tablice potisnite v priključek na sistemski plošči in zaprite zaklep, da pritrdite kabel. Po postopku 1. Ponovno namestite baterijo. 2. Ponovno namestite pokrov osnovne plošče.
Ponovna namestitev zvočnikov OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. Ko končate delo v notranjosti računalnika, upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Dodatne informacije o varnem delu najdete na domači strani za skladnost s predpisi na naslovu www.dell.com/regulatory_compliance.
Po postopku 1. Znova namestite pogon SSD/Intel Optane. 2. Ponovno namestite pokrov osnovne plošče. Plošča V/I Odstranjevanje V/I-plošče OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. Ko končate delo v notranjosti računalnika, upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika.
Ponovna namestitev V/I-plošče OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. Ko končate delo v notranjosti računalnika, upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Dodatne informacije o varnem delu najdete na domači strani za skladnost s predpisi na naslovu www.dell.com/regulatory_compliance. Postopek 1.
Po postopku 1. Ponovno namestite zvočnika. 2. Znova namestite pogon SSD/Intel Optane. 3. Ponovno namestite pokrov osnovne plošče. Sklop zaslona Odstranjevanje sklopa zaslona OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. Ko končate delo v notranjosti računalnika, upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika.
3. Znova namestite pet vijakov (M2,5x5), s katerimi sta levi in desni tečaj pritrjena na sistemsko ploščo ter sklop naslona za dlani in tipkovnice. 4. Sklop naslona za dlani in tipkovnice dvignite pod kotom. 5. Sklop naslona za dlani in tipkovnice potisnite in odstranite s sklopa zaslona.
6. Ko opravite predhodni postopek, vam ostane sklop zaslona.
Ponovna namestitev sklopa zaslona OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. Ko končate delo v notranjosti računalnika, upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Dodatne informacije o varnem delu najdete na domači strani za skladnost s predpisi na naslovu www.dell.com/regulatory_compliance.
4. Kabel zvočnikov napeljite skozi vodila na sklopu naslona za dlani in tipkovnice. 5. Kabel zaslona priključite na sistemsko ploščo.
Po postopku 1. Ponovno namestite ventilator. 2. Ponovno namestite brezžično kartico. 3. Ponovno namestite pokrov osnovne plošče. Plošča gumba za vklop/izklop Odstranjevanje plošče gumba za vklop OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika.
Postopek 1. Znova namestite vijak (M2x2), s katerim je gumb za vklop pritrjen na sklop naslona za dlani in tipkovnice [2]. 2. Gumb za vklop dvignite s sklopa naslona za dlani in tipkovnice [2]. Namestitev plošče gumba za vklop OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika.
Po postopku 1. Ponovno namestite sklop zaslona. 2. Ponovno namestite trdi disk. 3. Ponovno namestite ventilator. 4. Ponovno namestite brezžično kartico. 5. Ponovno namestite baterijo. 6. Ponovno namestite pokrov osnovne plošče. Sistemska plošča Odstranjevanje matične plošče OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika.
3. Odstranite pomnilniške module. 4. Odstranite brezžično kartico. 5. Odstranite ventilator. 6. Odstranite hladilnik. 7. Odstranite pogon SSD/Intel Optane. Postopek 1. Odvijte vijaka (M2,5x5), s katerima je levi tečaj zaslona pritrjen na sklop naslona za dlani in tipkovnice. 2. Do konca dvignite levi tečaj zaslona. 3. Kabel zvočnika odklopite s sistemske plošče. 4. Odprite zaklep in tipkovnico odklopite s sistemske plošče. 5. Odprite zaklep in kabel osvetlitve tipkovnice odklopite s sistemske plošče. 6.
Ponovna namestitev matične plošče OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. Ko končate delo v notranjosti računalnika, upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Dodatne informacije o varnem delu najdete na domači strani za skladnost s predpisi na naslovu www.dell.com/regulatory_compliance.
3. Press the left display hinge down on the system board. 4. Odstranite tri vijake (M2.5x5), s katerimi je levi tečaj zaslona pritrjen na sistemsko ploščo. 5. Kabel vrat za napajalnik in zvočniški kabel priključite na sklop sistemske plošče. 6. Kabel trdega diska potisnite v priključek na sistemski plošči in zaprite zaklep, da pritrdite kabel [3]. 7. Kabel trdega diska potisnite v priključek na sistemski plošči in zaprite zaklep, da pritrdite kabel [3].
Po postopku 1. Znova namestite pogon SSD/Intel Optane. 2. Ponovno namestite hladilnik. 3. Ponovno namestite ventilator. 4. Ponovno namestite brezžično kartico. 5. Ponovno namestite pomnilniške module. 6. Ponovno namestite baterijo. 7. Ponovno namestite pokrov osnovne plošče. Vnos servisne številke v programu za nastavitev BIOS-a 1. Vklopite ali znova zaženite računalnik. 2. Ko se prikaže logotip DELL, pritisnite tipko F2, da odprete program za nastavitev BIOS-a. 3.
notranjosti računalnika, upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Dodatne informacije o varnem delu najdete na domači strani za skladnost s predpisi na naslovu www.dell.com/regulatory_compliance. OPOMBA Velja samo za računalnike z bralnikom prstnih odtisov. Pred postopkom 1. Odstranite pokrov osnovne plošče. 2. Odstranite baterijo. 3. Odstranite pomnilniške module. 4. Odstranite brezžično kartico. 5. Odstranite ventilator. 6. Odstranite hladilnik.
notranjosti računalnika, upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Dodatne informacije o varnem delu najdete na domači strani za skladnost s predpisi na naslovu www.dell.com/regulatory_compliance. OPOMBA Velja samo za računalnike, ki so opremljeni z bralnikom prstnih odtisov. Postopek 1. Gumbasto baterijo prilepite v režo na sklopu naslona za dlani in tipkovnice. 2. Kabel bralnika prstnih odtisov prilepite na sklop naslona za dlani in tipkovnice. 3.
Vrata za napajalnik Odstranjevanje vrat za napajalnik OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. Ko končate delo v notranjosti računalnika, upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Dodatne informacije o varnem delu najdete na domači strani za skladnost s predpisi na naslovu www.dell.com/regulatory_compliance.
Postopek 1. Vrata za napajalnik namestite v režo na sklopu naslona za dlani. 2. Znova namestite vijak (M2x3), s katerim so vrata za napajalnik pritrjena na sklop naslona za dlani in tipkovnice. Po postopku 1. Ponovno namestite sistemsko ploščo. 2. Ponovno namestite sklop zaslona. 3. Ponovno namestite brezžično kartico. 4. Ponovno namestite pomnilniške module. 5. Ponovno namestite baterijo. 6. Ponovno namestite pokrov osnovne plošče.
5. Odstranite ventilator. 6. Odstranite hladilnik. OPOMBA Sistemsko ploščo lahko odstranite skupaj s pritrjenim hladilnikom. 7. Odstranite pogon SSD/Intel Optane. 8. Odstranite trdi disk. 9. Odstranite sledilno tablico. 10. Odstranite zvočnika. 11. Odstranite ploščo V/I. 12. Odstranite sklop zaslona. 13. Odstranite ploščo gumba za vklop. 14. Odstranite sistemsko ploščo. 15. Odstranite gumb za vklop z bralnikom prstnih odtisov (dodatna možnost). 16. Odstranite vrata za napajalnik.
Po postopku 1. Znova namestite vrata za napajalnik. 2. Znova namestite gumb za vklop z bralnikom prstnih odtisov (dodatna možnost). 3. Ponovno namestite sistemsko ploščo. 4. Znova namestite ploščo gumba za vklop 5. Ponovno namestite sklop zaslona. 6. Znova namestite ploščo V/I. 7. Ponovno namestite zvočnika. 8. Znova namestite sledilno ploščico. 9. Ponovno namestite trdi disk. 10. Znova namestite pogon SSD/Intel Optane. 11. Ponovno namestite hladilnik.
Pred postopkom 1. Odstranite pokrov osnovne plošče. 2. Odstranite brezžično kartico. 3. Odstranite ventilator. 4. Odstranite sklop zaslona. Postopek 1. Pry open the display hinge-covers on the bottom of the display assembly. 2. Privzdignite okvir zaslona, da ga sprostite s hrbtnega pokrova zaslona in sklopa antene [1]. 3. Okvir zaslona dvignite s hrbtnega pokrova zaslona in sklopa antene [2].
Po postopku 1. Ponovno namestite sklop zaslona. 2. Ponovno namestite ventilator. 3. Ponovno namestite brezžično kartico. 4. Ponovno namestite pokrov osnovne plošče. Kamera Odstranjevanje kamere OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika.
Postopek 1. Kabel kamere priključite na modul kamere [3]. 2. S poravnalnim stebričkom namestite modul kamere na hrbtni pokrov zaslona in sklop antene [1]. Po postopku 1. Znova namestite okvir zaslona. 2. Ponovno namestite sklop zaslona. 3. Ponovno namestite brezžično kartico. 4. Ponovno namestite pokrov osnovne plošče.
3. Odlepite trak, s katerim je kabel zaslona pritrjen na hrbtno stran plošče zaslona. 4. Odprite zaklep in kabel zaslona odklopite od priključka kabla plošče zaslona. OPOMBA Raztegljivih trakov (SR) ne vlecite in nato spustite s plošče zaslona. Nosilcev ni treba odstraniti s plošče zaslona. 5. Ploščo zaslona dvignite s sklopa hrbtnega pokrova zaslona in antene.
4. Obrnite ploščo zaslona in odprtine za vijake na plošči zaslona poravnajte z odprtinami za vijake na sklopu hrbtnega pokrova zaslona in antene. 5. Znova privijte vijaka (M2x2) in vijaka (M2,5x2,5), ki ploščo zaslona pritrjujejo na sklop hrbtnega pokrova zaslona in antene. Po postopku 1. Znova namestite okvir zaslona. 2. Ponovno namestite sklop zaslona. 3. Ponovno namestite ventilator. 4. Ponovno namestite brezžično kartico. 5. Ponovno namestite pokrov osnovne plošče.
notranjosti računalnika, upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Dodatne informacije o varnem delu najdete na domači strani za skladnost s predpisi na naslovu www.dell.com/regulatory_compliance. Pred postopkom 1. Odstranite pokrov osnovne plošče. 2. Odstranite brezžično kartico. 3. Odstranite sklop zaslona. 4. Odstranite okvir zaslona. Postopek 1. Odlepite trak, s katerim je kabel zaslona pritrjen na tečaj zaslona. 2.
Po postopku 1. Znova namestite okvir zaslona. 2. Ponovno namestite sklop zaslona. 3. Ponovno namestite brezžično kartico. 4. Ponovno namestite pokrov osnovne plošče. Kabel zaslona Odstranjevanje kabla zaslona OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika.
Ponovna namestitev kabla zaslona OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika. Ko končate delo v notranjosti računalnika, upoštevajte navodila v poglavju Ko končate delo v notranjosti računalnika. Dodatne informacije o varnem delu najdete na domači strani za skladnost s predpisi na naslovu www.dell.com/regulatory_compliance. Postopek 1.
5. Odstranite okvir zaslona. 6. Odstranite kamero. 7. Odstranite ploščo zaslona. 8. Odstranite tečaja zaslona. 9. Odstranite kabel zaslona. Postopek Po opravljenem zgornjem postopku vam ostane sklop hrbtnega pokrova in antene. Ponovna namestitev hrbtnega pokrova zaslona in sklopa antene OPOMBA Preden začnete delo v notranjosti računalnika, preberite varnostne informacije, ki so bile priložene računalniku, in upoštevajte navodila v poglavju Preden začnete delo v notranjosti računalnika.
Po postopku 1. Znova namestite kabel zaslona. 2. Znova namestite tečaja zaslona. 3. Znova namestite ploščo zaslona. 4. Ponovno namestite kamero. 5. Znova namestite okvir zaslona. 6. Ponovno namestite sklop zaslona. 7. Ponovno namestite ventilator. 8. Ponovno namestite brezžično kartico. 9. Ponovno namestite pokrov osnovne plošče.
3 Gonilniki naprave Pripomoček Intel Chipset Software Installation Utility V upravitelju naprav preverite, če je gonilnik za nabor vezij nameščen. Namestite posodobitev nabora vezij Intel s spletne strani www.dell.com/support. Video gonilniki V upravitelju naprav preverite, če je video gonilnik nameščen. Namestite posodobitev gonilnika grafične kartice s spletne strani www.dell.com/support. Gonilnik Intel Serial IO V upravitelju naprav preverite, če je gonilnik Intel Serial IO nameščen.
4 Sistemske nastavitve OPOMBA Prikaz elementov, navedenih v tem razdelku, je odvisen od računalnika in nameščenih naprav. Nastavitev sistema POZOR Nastavitve programa BIOS Setup (Nastavitev BIOS-a) spreminjajte le, če imate strokovno znanje s področja računalništva. Nekatere spremembe lahko povzročijo nepravilno delovanje računalnika. OPOMBA Pred spreminjanjem programa za nastavitev BIOS-a priporočamo, da si zapišete podatke o tem programu za poznejšo uporabo.
V meniju za enkratni zagon so prikazane naprave, ki jih lahko zaženete, vključno z možnostjo diagnostike. Možnosti menija za zagon so: • • Removable Drive (Izmenljivi pogon) (če je na voljo) Pogon STXXXX (če je na voljo) • • • Optical Drive (optični pogon, če je na voljo) SATA hard drive (trdi disk SATA) (če je na voljo) Diagnostika OPOMBA XXX označuje številko pogona SATA. OPOMBA Če izberete možnost Diagnostics (Diagnostika), se prikaže zaslon ePSA diagnostics (Diagnostika ePSA).
Splošne informacije o sistemu 64–Bit Technology Prikazuje, če je uporabljena 64-bitna tehnologija. Podatki o napravi SATA-0 Prikazuje podatke o pogonu SSD-0 SATA M.2 računalnika. SATA-1 Prikazuje podatke o pogonu SSD-1 SATA M.2 računalnika. M.2 PCIe SSD-0 Prikazuje podatke o pogonu SSD-0 PCIe M.2 računalnika. M.2 PCIe SSD-1 Prikazuje podatke o pogonu SSD-1 PCIe M.2 računalnika. Video Controller Prikazuje vrsto video krmilnika računalnika.
System Configuration (Konfiguracija sistema) Keyboard Backlight Timeout on AC Ko je osvetlitev omogočena, ta funkcija določa vrednost prekinitve za osvetlitev tipkovnice, ko je adapter za izmenični tok priključen v računalnik. Keyboard Backlight Timeout on Battery Ko je osvetlitev omogočena, ta funkcija določa vrednost prekinitve za osvetlitev tipkovnice, ko računalnik deluje z napajanjem iz baterije. Miscellaneous Devices Omogoči ali onemogoči različne vgrajene naprave. Tabela 5.
Tabela 8. Možnosti sistemskih nastavitev – Meni razširitev Intel Software Guard Extensions Intel Software Guard Extensions (Podaljšanje zaščite programske opreme Intel) Intel SGX Enable Omogoči ali onemogoči razširitve Intel Software Guard Extensions. Enclave Memory Size Nastavite velikost pomnilnika Enclave Reserve razširitev Intel Software Guard Extensions. Delovanje Multi Core Support Omogoči več jeder.
Intel Software Guard Extensions (Podaljšanje zaščite programske opreme Intel) Full Screen Logo Omogoči ali onemogoči logotip v celozaslonskem načinu. Warnings and Errors Povzroči zaustavitev zagona pri zaznanih opozorilih ali napakah. Tabela 9. Možnosti sistemskih nastavitev – Meni za podporo virtualizacije Podpora za virtualizacijo Virtualization To polje določa, če lahko VMM (Virtual Machine Monitor) uporablja dodatne zmogljivosti strojne opreme, ki jih ponuja tehnologija virtualizacije Intel.
7. Ponovno namestite pokrov osnovne plošče. Ponastavitev gesel za BIOS (System Setup (Nastavitev sistema)) in sistemskih gesel Za brisanje sistemskih gesel ali gesel za BIOS se obrnite na tehnično pomoč Dell, kot je opisano na www.dell.com/contactdell. OPOMBA Več informacij o ponastavitvi gesel za Windows ali programe je na voljo v dokumentaciji za sistem Windows ali program.
5 Odpravljanje težav Diagnostika z izboljšanim predzagonskim ocenjevanjem sistema (ePSA) Diagnostični postopek ePSA (oziroma diagnostika sistema) izvede celovit pregled strojne opreme. Postopek ePSA je vdelan v BIOS in se zažene znotraj BIOS-a.
Izklopljeno • • • Napajalnik je priključen in baterija je popolnoma napolnjena. Računalnik se napaja prek baterije in napolnjenost baterije je večja od 5 %. Računalnik je v stanju spanja, mirovanja ali pa je izklopljen. OPOMBA Lučka dejavnosti trdega diska deluje samo v računalnikih s trdim diskom. Lučka stanja napajanja in lučka stanja baterije utripa rumeno in pojavljajo se kode piskov, ki nakazujejo napake.
Posodobitev BIOS-a Ko je na voljo posodobitev ali ko znova namestite sistemsko ploščo, boste morda morali posodobiti BIOS. Upoštevajte to navodilo za posodobitev BIOS-a: 1. Vklopite računalnik. 2. Obiščite spletno mesto www.dell.com/support. 3. Kliknite Product Support (Podpora za izdelek), vnesite servisno oznako svojega računalnika in kliknite Submit (Pošlji). OPOMBA Če nimate servisne oznake, uporabite funkcijo samodejnega zaznavanja ali pa ročno poiščite model svojega računalnika. 4.
4. Zagonski pogon USB priključite na računalnik, ki mu je treba posodobiti BIOS. 5. Znova zaženite računalnik in pritisnite F12 , ko se na zaslonu prikaže logotip Dell. 6. Pogon USB zaženite v enkratnem zagonskem meniju. 7. Vnesite ime namestitvene datoteke za BIOS in pritisnite Enter. 8. Prikazal se bo pripomoček za posodobitev BIOS-a. Upoštevajte navodila na zaslonu, če želite dokončati posodobitev BIOS-a.
6 Iskanje pomoči in stik z družbo Dell Viri samopomoči Informacije ter pomoč v zvezi z izdelki in storitvami Dell so na voljo v teh virih samopomoči: Tabela 15. Viri samopomoči Viri samopomoči Lokacija virov Informacije o izdelkih in storitvah Dell www.dell.com Moj Dell Nasveti Stik s podporo V iskalno polje sistema Windows vnesite Contact Support in pritisnite tipko Enter. Spletna pomoč za operacijski sistem www.dell.com/support/windows www.dell.