Inspiron 5494 Servicehandbok Regleringsmodell: P120G Regleringstyp: P120G001
Anmärkningar, försiktighetsbeaktanden och varningar OBS OBS innehåller viktig information som hjälper dig att få ut det mesta av produkten. CAUTION VIKTIGT anger antingen risk för skada på maskinvara eller förlust av data och förklarar hur du kan undvika problemet. VARNING En VARNING visar på en potentiell risk för egendoms-, personskador eller dödsfall. © 2019 Dell Inc. eller dess dotterbolag. Med ensamrätt. Dell, EMC och andra varumärken är varumärken som tillhör Dell Inc. eller dess dotterbolag.
Innehåll 1 Arbeta inuti datorn....................................................................................................................... 5 Säkerhetsinstruktioner.......................................................................................................................................................... 5 Innan du arbetar inuti datorn................................................................................................................................................
Trådlösa och Bluetooth-drivrutiner................................................................................................................................... 68 4 Systeminstallationsprogram........................................................................................................69 Systeminstallationsprogram............................................................................................................................................... 69 Öppna BIOS-inställningsprogrammet..
1 Arbeta inuti datorn Säkerhetsinstruktioner Följ dessa säkerhetsföreskrifter för att skydda datorn och dig själv. Om inget annat anges antar varje procedur som ingår i detta dokument att du har läst säkerhetsinformationen som medföljde datorn. OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn. Mer information om bästa metoder för säkert handhavande finns på hemsidan för regelefterlevnad på www.dell.com/ regulatory_compliance.
Skydd mot elektrostatisk urladdning (ESD) ESD är ett stort problem när du hanterar elektroniska komponenter, särskilt känsliga komponenter såsom expansionskort, processorer, DIMM-minnen och moderkort. Mycket små belastningar kan skada kretsarna på ett sätt som kanske inte är uppenbart, men som kan ge tillfälliga problem eller en förkortad produktlivslängd. Eftersom det finns påtryckningar i branschen för lägre strömkrav och högre densitet blir ESD-skyddet allt viktigare att tänka på.
• • • Arbetsmiljö - Innan du använder ESD-fältservicekittet ska du utvärdera situationen på kundanläggningen. Till exempel, driftsättning av kittet för en servermiljö är annorlunda än för en stationär eller bärbar dator. Servrar är normalt installerade i ett rack inom ett datacenter; stationära eller bärbara datorer är vanligen placerade på kontorsskrivbord eller i bås.
2 Ta bort och installera komponenter Rekommenderade verktyg Procedurerna i detta dokument kan kräva att följande verktyg används: • • • Krysspårmejsel (Philips), nr 1 Flat skruvmejsel Plastrits Skruvlista OBS När du tar bort skruvarna från en komponent rekommenderar vi att du noterar skruvtyp, antal skruvar och placerar dem i en skruvförvaringslåda. Detta är för att säkerställa att rätt antal skruvar och korrekt skruvtyp används när komponenten sätts tillbaka. OBS Vissa datorer har magnetiska ytor.
Komponent Sitter fast i Skruvtyp Kvantitet Strömbrytare Handledsstöds- och tangentbordsenhet M2x2 1 Halvledarenhet Moderkort M2x3 1 Moderkort Handledsstöds- och tangentbordsenhet M2x4 1 Pekskiva Handledsstöds- och tangentbordsenhet M1.6x2 2 Pekskiva (stödfäste) Handledsstöds- och tangentbordsenhet M1.
3. Dra kåpan från höger på Handledsstöds- och tangentbordsenhet. 4. Lyft bort kåpan från handledsstöds- och tangentbordsenheten från höger sida av kåpan.
OBS Följande steg gäller endast om du vill ta bort någon annan komponent från dator. 5. Dra bort bandet som håller fast batterikabeln på moderkortet. 6. Koppla bort batterikabeln från moderkortet. 7. Tryck och håll strömbrytaren intryckt i 5 sekunder för att jorda datorn och tömma den kvarvarande strömmen. Sätta tillbaka baskåpan OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn.
3. Rikta in och placera basskyddet på handledstöds och tangentbordsenheten. 4. Fäst basskyddet på plats. 5. Sätt tillbaka de sju skruvarna (M2.5x5) som håller fast baskåpan i handledsstödet och tangentbordsenheten.
6. Dra åt de två fästskruvarna som håller fast baskåpan i handledsstöds- och tangentbordsenheten. Batteriet Ta bort batteriet OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn. Mer information om bästa metoder för säkert handhavande finns på hemsidan för regelefterlevnad på www.dell.
• Om batteriet sitter fast i datorn på grund av svullnad, försök inte släppa det som punktering, böjning eller krossning, ett litiumjonbatteri kan vara farligt. Kontakta Dell tekniska support för hjälp i så fall. Se www.dell.com/contactdell. • Köp alltid äkta batterier från www.dell.com eller auktoriserade Dell-partners och återförsäljare. Nödvändiga förhandsåtgärder Ta bort kåpan. Procedur 1. Dra bort bandet som håller fast batterikabeln på moderkortet. 2. Koppla bort batterikabeln från moderkortet.
Nödvändiga efterhandsåtgärder Sätt tillbaka kåpan. Minnesmoduler Ta bort minnesmodulerna OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn. Mer information om bästa metoder för säkert handhavande finns på hemsidan för regelefterlevnad på www.dell.com/regulatory_compliance.
2. Bänd isär låsklämmorna på vardera änden av minnesmodulspåret med fingertopparna tills modulen hoppar upp. 3. Ta bort minnesmodulen från minnesmodulkortplatsen. Sätta tillbaka minnesmodulerna OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn.
Nödvändiga efterhandsåtgärder Sätt tillbaka kåpan. Trådlöst kort Ta bort kortet för trådlös teknik OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn. Mer information om bästa metoder för säkert handhavande finns på hemsidan för regelefterlevnad på www.dell.com/regulatory_compliance.
2. Ta bort skruven (M2x3) som håller fast fästet för det trådlösa kortet i moderkortet. 3. Skjut på och ta bort fästet för det trådlösa kortet från det trådlösa kortet. 4. Koppla bort antennkablarna från det trådlösa kortet. 5. Skjut ut det trådlösa kortet och avlägsna det från platsen för det trådlösa kortet.
Sätta tillbaka kortet för trådlös teknik OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn. Mer information om bästa metoder för säkert handhavande finns på hemsidan för regelefterlevnad på www.dell.com/regulatory_compliance.
Nödvändiga efterhandsåtgärder Sätt tillbaka kåpan. Knappcellsbatteri Ta bort knappcellsbatteriet OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn. Mer information om bästa metoder för säkert handhavande finns på hemsidan för regelefterlevnad på www.dell.com/regulatory_compliance.
Sätta tillbaka knappcellsbatteriet OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn. Mer information om bästa metoder för säkert handhavande finns på hemsidan för regelefterlevnad på www.dell.com/regulatory_compliance.
Nödvändiga efterhandsåtgärder Sätt tillbaka kåpan. Fläkt Ta bort fläkten OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn. Mer information om bästa metoder för säkert handhavande finns på hemsidan för regelefterlevnad på www.dell.com/regulatory_compliance. Nödvändiga förhandsåtgärder Ta bort kåpan.
Sätta tillbaka fläkten OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn. Mer information om bästa metoder för säkert handhavande finns på hemsidan för regelefterlevnad på www.dell.com/regulatory_compliance. Procedur 1.
Nödvändiga efterhandsåtgärder Sätt tillbaka kåpan. Kylfläns Ta bort kylflänsen OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn. Mer information om bästa metoder för säkert handhavande finns på hemsidan för regelefterlevnad på www.dell.com/regulatory_compliance.
Sätta tillbaka kylflänsen OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn. Mer information om bästa metoder för säkert handhavande finns på hemsidan för regelefterlevnad på www.dell.com/regulatory_compliance. CAUTION Felaktig inriktning av kylflänsen kan orsaka skada på moderkortet och processorn.
Nödvändiga efterhandsåtgärder Sätt tillbaka kåpan. Halvledarenhet/Intel Optane Ta bort halvledarenheten/Intel Optane. Du måste inaktivera Intel Optane-enheten innan den tas bort från datorn. Mer information om hur du inaktiverar Intel Optane-enheten finns i Inaktivera Intel Optane-minne. OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn.
5. Vänd på halvledarenhetens avskärming. 6. Ta bort skruven (M2x2) som håller avskärmning halvledarenhetsmonteringen i halvledarenhetsfästet 7. Lyft upp halvledarenheten från halvledarenhetens avskärmning. Procedur för att ta bort M.2 2280-halvledarenhet 1. Lossa fästskruven som fäster halvledarenhetens avskärmning Intel Optane-skärmen och halvledarenheten/Intel Optane till handledsstödet och tangentbordsenheten. 2.
4. Skjut och ta bort halvledarenheten/Intel Optane från halvledarenheten/Intel Optane-kortplatsen. Sätt tillbaka halvledarenheten/Intel Optane Aktivera Intel Optane enheten när du har satt tillbaka den. Mer information om aktivering av Intel Optane-enheten, se Aktivera Intel Optane-minne. OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn.
3. Rikta in skåran på halvledarenheten med fliken på kontakten för halvledarenheten. 4. För in halvledarenheten i kontakten för halvledarenheten. 5. Sätt i fliken på halvledarenhetens drivsköld i facket på handstödet och tangentbordsenheten. 6. Dra åt fästskruven som fäster halvledarenhetens avskärmning och halvledarenheten till handledsstödet och tangentbordsenheten. 7. Sätt tillbaka skruven (M2x3) som håller fast halvledarenhets-modulen i handleds- och tangentbordsstödet.
4. Sätt tillbaka skruven (M2x3) som håller fast halvledarenheten/Intel Optane i handleds- och tangentbordsstödet. 5. Dra åt fästskruven som fäster halvledarenhetens avskärmning Intel Optane-skärmen och halvledarenheten/Intel Optane till handledsstödet och tangentbordsenheten. OBS Halvledarenhetens avskärmning/Intel Optane avskärmning är endast tillgänglig för datorer som levereras med PCIe eller NVMe halvledarenhet/Intel Optane. Nödvändiga efterhandsåtgärder Sätt tillbaka kåpan.
4. Koppla loss mellandelen från hårddisken. 5. Ta bort de fyra skruvarna (M3x3) som håller fast hårddiskhållaren i hårddisken. 6. Lyft bort hårddiskhållaren från hårddisken.
Sätta tillbaka hårddisken Aktivera Intel Optane efter byte av SATA-lagringsenheten. Mer information om hur man aktiverar Intel Optane finns på Aktivera Intel Optane. OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn.
4. Rikta in skruvhålen på hårddiskmonteringen mot skruvhålen i handledsstöds- och tangentbordsmonteringen. 5. Sätt tillbaka de två skruvarna (M2x3) som håller fast hårddisken i handledsstöds- och tangentbordsenheten. 6. Anslut hårddiskkabeln till moderkortet och stäng spärren så att kabeln sitter fast ordentligt. Nödvändiga efterhandsåtgärder 1. Sätt tillbaka batteriet. 2. Sätt tillbaka kåpan.
Nödvändiga förhandsåtgärder 1. Ta bort kåpan. 2. Ta bort batteriet. Procedur 1. Öppna spärren och koppla ur kabeln till styrplattan från moderkortet. 2. Ta bort de tre skruvarna (M1.6x2) som håller fast styrplattan på handledsstöds och tangentbordsenheten. 3. Lyft bort fästet för styrplattan från handledsstöds- och tangentbordsenheten. 4. Ta bort de två skruvarna (M1.6x2) som håller styrplattan på handledsstöds och tangentbordsenheten. 5. Lyft bort styrplattan från handledsstöds och tangentbordsenheten.
Sätta tillbaka pekplattan OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn. Mer information om bästa metoder för säkert handhavande finns på hemsidan för regelefterlevnad på www.dell.com/regulatory_compliance.
4. Sätt tillbaka de tre skruvarna (M1.6x2) som håller fast styrplattan på handledsstöds och tangentbordsenheten. 5. Skjut in styrplattans kabel på dess kontakt på moderkortet och stäng spärren så att kabeln sitter fast. Nödvändiga efterhandsåtgärder 1. Sätt tillbaka batteriet. 2. Sätt tillbaka kåpan. Högtalare Ta bort högtalarna OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn.
Sätta tillbaka högtalarna OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn. Mer information om bästa metoder för säkert handhavande finns på hemsidan för regelefterlevnad på www.dell.com/regulatory_compliance.
Nödvändiga efterhandsåtgärder 1. Sätt tillbaka halvledarenheten/Intel Optane. 2. Sätt tillbaka kåpan. I/O-kort Ta bort I/O-kortet OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn. Mer information om bästa metoder för säkert handhavande finns på hemsidan för regelefterlevnad på www.dell.
Sätta tillbaka I/O-kortet OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn. Mer information om bästa metoder för säkert handhavande finns på hemsidan för regelefterlevnad på www.dell.com/regulatory_compliance. Procedur 1.
Nödvändiga efterhandsåtgärder 1. Sätt tillbaka högtalarna. 2. Sätt tillbaka halvledarenheten/Intel Optane. 3. Sätt tillbaka kåpan. Bildskärmsenhet Ta bort bildskärmsmonteringen OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn.
3. Ta bort de fyra skruvarna (M2,5x4) som håller fast vänster och höger gångjärn i moderkortet samt handledsstöds- och tangentbordsenheten. 4. Öppna handledsstödet och tangentbordsenheten i en vinkel. 5. Skjut och ta bort handledsstödet och tangentbordsmonteringen från bildskärmsmonteringen.
6. När du har utfört alla steg ovan återstår bildskärmsenheten.
Sätta tillbaka bildskärmsenheten OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn. Mer information om bästa metoder för säkert handhavande finns på hemsidan för regelefterlevnad på www.dell.com/regulatory_compliance.
4. Dra skärmkabeln genom kabelhållarna på fläkten och handstödet och tangentbordsenheten. 5. Anslut bildskärmskabeln till moderkortet.
Nödvändiga efterhandsåtgärder 1. Sätt tillbaka fläkten. 2. Sätt tillbaka det trådlösa kortet. 3. Sätt tillbaka kåpan. Strömbrytarkortet Ta bort strömbrytarkortet OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn.
Procedur 1. Ta bort skruven (M2x2) som håller fast strömbrytaren i handledsstöds- och tangentbordsenheten. 2. Lyft bort strömbrytaren från handledsstöds- och tangentbordsenheten. Sätta tillbaka strömbrytarkortet OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn.
Nödvändiga efterhandsåtgärder 1. Sätt tillbaka bildskärmsenheten. 2. Sätt tillbaka hårddisken. 3. Sätt tillbaka fläkten. 4. Sätt tillbaka det trådlösa kortet. 5. Sätt tillbaka batteriet. 6. Sätt tillbaka kåpan. Moderkort Ta bort moderkortet OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn.
3. Ta bort minnesmodulerna. 4. Ta bort det trådlösa kortet. 5. Ta bort fläkten. 6. Ta bort kylflänsen. 7. Ta bort halvledarenheten/Intel Optane. Procedur 1. Ta bort de två skruvarna (M2.5x5) som håller fast det vänstra displaygångjärnet i handledsstöds och tangentbordsenheten. 2. Lyft vänster skärmgångjärn maximalt. 3. Koppla bort högtalarkabeln från moderkortet. 4. Lyft spärren och koppla bort tangentbordet från moderkortet. 5.
Sätta tillbaka moderkortet OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn. Mer information om bästa metoder för säkert handhavande finns på hemsidan för regelefterlevnad på www.dell.com/regulatory_compliance. OBS Datorns servicenummer finns på moderkortet.
3. Tryck ned vänster skärmgångjärn på systemkortet. 4. Sätt tillbaka de två skruvarna (M2.5x5) som håller fast det vänstra displaygångjärnet på moderkortet. 5. Anslut kabeln till nätadapterporten och högtalarkabeln på moderkortet. 6. För in kabeln för strömbrytarkortet i kontakten på moderkortet och stäng haken för att fästa kabeln. 7. Skjut fingeravtrycksläsarkabeln i kontakten på moderkortet och stäng spärren för att säkra kabeln. OBS Endast för datorer som levereras med fingeravtrycksläsare. 8.
Nödvändiga efterhandsåtgärder 1. Sätt tillbaka halvledarenheten/Intel Optane. 2. Sätt tillbaka kylflänsen. 3. Sätt tillbaka fläkten. 4. Sätt tillbaka det trådlösa kortet. 5. Sätt tillbaka minnesmodulerna. 6. Sätt tillbaka batteriet. 7. Sätt tillbaka kåpan. Ange servicenumret i BIOS-installationsprogrammet 1. Starta (eller starta om) datorn. 2. Tryck på F2 när DELL-logotypen visas för att öppna BIOS-inställningsprogrammet. 3.
arbetat inuti datorn. Mer information om bästa metoder för säkert handhavande finns på hemsidan för regelefterlevnad på www.dell.com/regulatory_compliance. OBS Gäller endast för datorer som levereras med fingeravtrycksläsare. Nödvändiga förhandsåtgärder 1. Ta bort kåpan. 2. Ta bort batteriet. 3. Ta bort minnesmodulerna. 4. Ta bort det trådlösa kortet. 5. Ta bort fläkten. 6. Ta bort kylflänsen. OBS Systemkortet kan tas bort och installeras tillsammans med kylflänsen som fortfarande är fäst. 7.
arbetat inuti datorn. Mer information om bästa metoder för säkert handhavande finns på hemsidan för regelefterlevnad på www.dell.com/regulatory_compliance. OBS Gäller endast för datorer som levereras med fingeravtrycksläsare. Procedur 1. Fäst fingeravtrycksläsarkortet i kortplatsen på handledsstödet och tangentbordsenheten. 2. Fäst fingeravtrycksläsarens kabel på handledsstöds- och tangentbordsenheten. 3. Placera strömbrytaren i kortplatsen på handledsstödet och tangentbordsenheten. 4.
Nätadapterport Ta bort strömadapterporten OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn. Mer information om bästa metoder för säkert handhavande finns på hemsidan för regelefterlevnad på www.dell.com/regulatory_compliance. Nödvändiga förhandsåtgärder 1. Ta bort kåpan. 2. Ta bort batteriet. 3.
Procedur 1. Placera nätadapterporten i kortplatsen på handledsstöd- och tangentbordsmonteringen. 2. Sätt tillbaka skruven (M2x3) som håller fast nätadapterporten i handledsstöds- och tangentbordsenheten. Nödvändiga efterhandsåtgärder 1. Sätt tillbaka moderkortet. 2. Sätt tillbaka bildskärmsenheten. 3. Sätt tillbaka det trådlösa kortet. 4. Sätt tillbaka minnesmodulerna. 5. Sätt tillbaka batteriet. 6. Sätt tillbaka kåpan.
5. Ta bort fläkten. 6. Ta bort kylflänsen. OBS Systemkortet kan tas bort och installeras tillsammans med kylflänsen som fortfarande är fäst. 7. Ta bort halvledarenheten/Intel Optane. 8. Ta bort hårddisken. 9. Ta bort styrplattan. 10. Ta bort högtalarna. 11. Ta bort I/O-kortet. 12. Ta bort bildskärmsenheten. 13. Ta bort strömbrytarkortet (tillval). 14. Ta bort moderkortet. 15. Ta bort strömbrytaren med fingeravtrycksläsare(tillval). 16. Ta bort nätadapterporten.
Nödvändiga efterhandsåtgärder 1. Sätt tillbaka nätadapterporten. 2. Sätt tillbaka strömbrytaren med fingeravtrycksläsare (tillval). 3. Sätt tillbaka moderkortet. 4. Sätt tillbaka strömbrytarkortet (tillval). 5. Sätt tillbaka bildskärmsenheten. 6. Sätt tillbaka I/O-kortet. 7. Sätt tillbaka högtalarna. 8. Sätt tillbaka styrplattan. 9. Sätt tillbaka hårddisken. 10. Sätt tillbaka halvledarenheten/Intel Optane. 11. Sätt tillbaka kylflänsen.
Nödvändiga förhandsåtgärder 1. Ta bort kåpan. 2. Ta bort det trådlösa kortet. 3. Ta bort fläkten. 4. Ta bort bildskärmsenheten. Procedur 1. Öppna skärmens gångjärnsskydd på undersidan av skärmenheten. 2. Bänd bildskärmsramen för att lossa den från bildskärmens bakre kåpa och antennenhet. 3. Lyft av bildskärmsramen från bildskärmens bakre kåpa och antennenhet.
Nödvändiga efterhandsåtgärder 1. Sätt tillbaka bildskärmsenheten. 2. Sätt tillbaka fläkten. 3. Sätt tillbaka det trådlösa kortet. 4. Sätt tillbaka kåpan. Kamera Ta bort kameran OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn.
Procedur 1. Anslut kamerakabeln till kameramodulen. 2. Använd justeringstapparna och fäst kameramodulen på bildskärmens bakre hölje och antennenheten. Nödvändiga efterhandsåtgärder 1. Sätt tillbaka bildskärmsramen. 2. Sätt tillbaka bildskärmsenheten. 3. Sätt tillbaka det trådlösa kortet. 4. Sätt tillbaka kåpan.
3. Dra bort tejpen som håller fast bildskärmskabeln på baksidan av bildskärmspanelen. 4. Öppna spärren och koppla bort bildskärmskabeln från bildskärmspanelens kabelkontakt. OBS Dra inte och lossa stretchtejpen från bildskärmspanelen. Det finns ingen anledning att separera fästena från bildskärmspanelen. 5. Lyft av bildskärmspanelen från bildskärmens bakre kåpa och antennenhet.
4. Vänd bildskärmspanelen och justera skruvhålen på displaypanelen med skruvhålen på skärmens baksida och antennenheten. 5. Sätt tillbaka de två skruvarna (M2x2) och två skruvarna (M2.5x2.5) som håller fast bildskärmspanelen i bildskärmens bakhölje och antennmonteringen. Nödvändiga efterhandsåtgärder 1. Sätt tillbaka bildskärmsramen. 2. Sätt tillbaka bildskärmsenheten. 3. Sätt tillbaka fläkten. 4. Sätt tillbaka det trådlösa kortet. 5. Sätt tillbaka kåpan.
arbetat inuti datorn. Mer information om bästa metoder för säkert handhavande finns på hemsidan för regelefterlevnad på www.dell.com/regulatory_compliance. Nödvändiga förhandsåtgärder 1. Ta bort kåpan. 2. Ta bort det trådlösa kortet. 3. Ta bort bildskärmsenheten. 4. Ta bort bildskärmsramen. Procedur 1. Dra bort tejpen som håller fast bildskärmskabeln i bildskärmsgångjärnet. 2. Observera dragningen av skärmkabeln och antennkabeln och ta sedan bort kablarna från bildskärmsgångjärnen. 3.
Nödvändiga efterhandsåtgärder 1. Sätt tillbaka bildskärmsramen. 2. Sätt tillbaka bildskärmsenheten. 3. Sätt tillbaka det trådlösa kortet. 4. Sätt tillbaka kåpan. Bildskärmskabel Ta bort bildskärmskabeln OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn.
Sätta tillbaka bildskärmskabeln OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn. När du har arbetat inuti datorn följer du anvisningarna i När du har arbetat inuti datorn. Mer information om bästa metoder för säkert handhavande finns på hemsidan för regelefterlevnad på www.dell.com/regulatory_compliance. Procedur 1.
5. Ta bort bildskärmsramen. 6. Ta bort kameran. 7. Ta bort bildskärmspanelen. 8. Ta bort bildskärmsgångjärnen. 9. Ta bort bildskärmskabeln. Procedur När alla momenten ovan har utförts återstår bildskärmens bakre kåpa och antennmontering. Sätta tillbaka bildskärmens bakre kåpa och antennmonteringen OBS Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i Innan du utför något arbete inuti datorn.
Nödvändiga efterhandsåtgärder 1. Sätt tillbaka bildskärmskabeln. 2. Sätt tillbaka bildskärmsgångjärnen. 3. Sätt tillbaka bildskärmspanelen. 4. Sätt tillbaka kameran. 5. Sätt tillbaka bildskärmsramen. 6. Sätt tillbaka bildskärmsenheten. 7. Sätt tillbaka fläkten. 8. Sätt tillbaka det trådlösa kortet. 9. Sätt tillbaka kåpan.
3 Enhetsdrivrutiner Verktyg för installation av programvara för Intel kretsuppsättningar Kontrollera i Enhetshanteraren om kretsuppsättningen är installerad. Installera uppdateringarna av Intels kretsuppsättningar från www.dell.com/support. Videodrivrutiner Kontrollera i Enhetshanteraren om videodrivrutinen är installerad. Installera uppdateringen för videodrivrutinen från www.dell.com/support. Intel Serial IO-drivrutin Kontrollera i Enhetshanteraren om drivrutinen för Intel Serial IO är installerad.
4 Systeminstallationsprogram OBS Beroende på datorn och dess installerade enheter visas kanske inte alla objekt som beskrivs i det här avsnittet.
Tangenter Navigering Esc Flyttar till föregående sida tills du ser huvudskärmen. Om du trycker på Esc i huvudskärmen visas ett meddelande som uppmanar dig att spara osparade ändringar och startar om systemet. Startsekvens Startsekvens ger dig möjlighet att kringgå den systemuppsättningsspecifika uppstartsanordningen och starta direkt till en viss enhet (till exempel: optisk enhet eller hårddisk).
Allmänt-Systeminformation Processor Information (processorinformation) Processor Type Visar processortypen. Core Count Visar antalet kärnor på processorn. Processor ID Visar processorns identifikationskod. Current Clock Speed Visar den aktuella processorns klockhastighet. Minimum Clock Speed Visar processorns minsta klockhastighet. Maximum Clock Speed Visar processorns högst klockhastighet. Processor L2 Cache Visar storleken på processorns L2-cacheminne.
Allmänt-Systeminformation Date/Time Visar aktuellt datum visas i formatet MM/DD/ÅÅ och aktuell tid i formatet TT:MM:SS AM/PM-format. Tabell 4. Systeminstallationsalternativ—menyn Systemkonfiguration System Configuration (systemkonfiguration) SATA Operation Konfigurera driftläget för den inbyggda SATA-hårddiskstyrenheten. Drives Aktivera eller inaktivera olika inbyggda enheter. SMART Reporting Aktivera eller inaktivera SMART-rapportering under systemstart.
Security (säkerhet) Admin Setup Lockout Aktivera för att förhindra att användare öppnar systeminstallationen när ett administratörslösenord är satt. Master Password Lockout Inaktiverar support för huvudlösenord. Hårddisklösenorden måste rensas innan inställningen kan ändras. SMM Security Mitigation Aktivera eller inaktivera SMM Security Mitigation. Tabell 7.
Intel Software Guard-tillägg Advanced Battery Charge Configuration Aktivera avancerad batteriladdningskonfiguration från början av dagen till en viss period. Primary Battery Charge Configuration Ställ in primära batteriladdningsinställningar med en förvald start och stopp för anpassad laddning. Standard: Adaptive (adaptivt). POST Behavior (beteende efter start) Adapter Warnings Aktivera adaptervarningar. Standard: Enabled (aktiverad). Numlock Enable Aktiverar NumLock-funktionen när datorn startas.
Tabell 13. Systeminstallationsprogram—menyn SupportAssist System Resolution SupportAssist-systemupplösning Auto OS Recovery Threshold Kontrollera det automatiska startflödet för konsolen SupportAssist System Resolution och för Dell OS Recovery-verktyget. SupportAssist OS Recovery Aktivera eller inaktivera startflödet för SupportAssist OS Recovery-verktyget i händelse av vissa systemfel. Återställa CMOS-inställningar CAUTION Att rensa CMOS-inställningarna återställer BIOS-inställningarna på datorn. 1.
5 Felsökning Förbättrad systemutvärderingsdiagnostik före start (ePSA) ePSA-diagnostiken (även kallad systemdiagnostik) utför en fullständig kontroll av din maskinvara. ePSA är inbäddad med BIOS och lanseras av BIOS internt.
Släckt • • • Nätadaptern är ansluten och batteriet är fulladdat. Datorn drivs med batteriet och batteriet har mer än 5 procent laddning. Datorn är i strömsparläge, viloläge, eller avstängd OBS Hårddiskens aktivitetslampa stöds endast på datorer som levereras med en hårddisk. Ström- och statuslampa för batteri blinkar orange tillsammans med pipkoder som indikerar ett fel.
Följ dessa steg för att flasha BIOS: 1. Starta datorn. 2. Gå till www.dell.com/support. 3. Klicka på Product Support (Produktsupport), ange servicenumret för din dator och klicka sedan på Submit (Skicka). OBS Om du inte har servicenumret, använd automatisk identifiering eller slå upp din datormodell manuellt. 4. Klicka på Drivers & downloads (Drivrutiner och hämtningsbara filer) > Find it myself (Hitta det själv). 5. Välj det operativsystem som är installerat på datorn. 6.
WiFi-cykel Om datorn inte kan ansluta till internet på grund av WiFi-anslutningsproblem kan en WiFi-cykelprocedur utföras. Följande procedur innehåller instruktioner om hur du genomför en WiFi-cykel: OBS Vissa Internet-leverantörer tillhandahåller en modem-/router kombinationsenhet. 1. Stäng av datorn. 2. Stäng av modemet. 3. Stäng av den trådlösa routern. 4. Vänta 30 sekunder. 5. Slå på den trådlösa routern. 6. Slå på modemet. 7. Starta datorn.